RCA RCRPS02GR Owner/User Manual - Page 2
Tour of the Remote, Advanced Functions
View all RCA RCRPS02GR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ode list for your TV is preset to TV converters, t to control. remote. Locate re trying to section. Circle em handy. nt to program e key, use your code for your y goes off after Preset Channels for TV Preset Channel Key Network 1 2 3 4 5 6 7 8 9 0 Channel Number ding down the entered a the code entry and the digit "0". ot go to step 3 e key is f some features vided in the Preset Channels for SAT•CBL• STREAM Preset Channel Key Network Channel Number 1 2 3 4 5 6 7 8 9 0 ntry procedure, last annels To program your Preset Channels: 1. Press and hold the P key. The Power key illuminates. Continue to hold for three seconds until you see a blink of the Power key LED. The light remains illuminated and now you can release the P key. satellite or mple, if one of ke you directly hannel you'd g table to gather orites for each 2. Press the 1 key to program your first preset channel. The POWER key flashes once and stays on. • Preset channels can be set up for satellite receivers, cable boxes, and digital TV converters (if you've programmed the SAT•CBL•STREAM key to operate that kind of device). Streaming players do not have preset channel capability. • Set up all satellite, cable, or digital converter box preset channels first. Then set up your TV channels. Jumping back and forth between them might get confusing. 3. Press the device key for this channel. NOTE: The device key you press in this step must be programmed to control your device in order for this preset channel to work. See the Programming the Remote section for information on programming these keys to control your devices. 4. Enter the channel number you wrote down for preset channel number 1 in the table above. In the example, you would press 2, then 0, then 2. The POWER key flashes after each each keypress. 5. When you've finished entering the channel number, press the P key to save your preset channel. The POWER key light turns off. NOTE: If you're programming a digital sub-channel (like 59.2), you need to press the -/INPUT key between the regular channel and the sub-channel (for example: 5, then 9, then -/INPUT, then 2). If you're finished programming your Preset Channels: Start using the remote normally. If you want to program more Preset Channels: Repeat steps 1 to 5 for the next Preset Channel. Preset Programming Notes • To quit programming preset channels at any time, press the EXIT•BACK key. The POWER key flashes 4 times. No changes to the Preset keys are made. • When you're programming presets, the remote gives you a maximum of 15 seconds between keypresses before it leaves programming mode and goes back to normal operation. The POWER key flashes 4 times (this means the remote has not saved your presets, and you'll have to start again). • During preset channel programming, the remote accepts only certain keypresses: the P key, the number keys, and the device keys. If you press any other key on the remote during preset programming, the remote exits preset programming without saving your changes. The POWER key flashes 4 times. You will have to start programming again. Using your Preset Channels 1. Press the TV or SAT/CBL/STREAM key. 2. Press the P key. The POWER key lights up and stays on. 3. Press the number key for the preset channel you want to access. For example, if you want to go to the channel you programmed as , press 3. While the POWER key is illuminated, the remote is in preset mode. This means you can go straight to your preset channels-you don't have to press the P key again. Preset mode lasts for 2 minutes after the last keypress. Here's how to use the remote in preset mode. To go to another preset: Press the number for that preset channel. To go to a channel that's not a preset: Press the P key to exit preset mode. The illuminated POWER key turns off. Then enter the channel number directly. (You can also use the CH up and down keys.) To exit preset mode at any time: Press the P key. Tour of the Remote In most cases, the keys on this remote perform the same functions as the keys on your original remotes once you've programmed this remote to operate your components. Many keys on this remote have other functions as well. Illuminated POWER key serves as an indicator light to provide feedback. It also turns on or off all of the devices you've programmed this remote to operate. Device keys (TV, SAT•CBL• STREAM) put the remote in the right mode to control your device. Backlight key ( ) turns backlighting on/off. GUIDE puts the remote in guide mode; which makes the CH+/- VOL+/- keys serve as arrow keys; they also access the same features as the keys on your original remotes. OK/ENTER key selects your on-screen or programming choices. The INPUT and - (dash) key has two functions: (1) it toggles through all the TV inputs; (2) when you're entering digital channel numbers directly, this button lets you separate the main channel number from the sub-channel number (such as 59.1). Channel PRESET mode provides you the capability to program your favorites channels on P1-P0 If you've programmed the SAT•CBL•STREAM key with a streaming media player, the following number keys have special functionality with that device: 1, 2, 3, and 4 serve as arrow keys in the player's on-screen menus (right, left, up, and down, respectively). 9 serves as a HOME key for the player. EXIT•BACK goes back one screen in the player's menus. Actual model may vary from illustration IMPORTANT Because this remote controls more than one device, you must first "tell" the remote which device you wish to operate. That means, if you wish to operate your TV, you must first press the TV key to put the remote in the TV Mode. The remote stays in that device mode until you press a different device key. For example, if your remote is in TV Mode and you want to operate the SAT•CBL•STREAM you must press the key to change device modes. Backlighting Backlight illumination helps you see the remote control keys better in the dark. You can turn backlight illumination on or off by pressing the backlight key ( ). Backlighting stays on as long as keys are being pressed and turns off four seconds after the last keypress. Once the backlight time has timed out, any keypress will reactivate it. If the backlight illumination is on, and you press the backlight key, the backlight turns off. Advanced Functions Master Power Each time you press the POWER key, this remote automatically turns on and off the devices you've programmed it to operate. This feature, called "Master Power", is enabled by default. To disable Master Power: 1. Press and hold the P key for 3 seconds, The Power key comes on. 2. Press VOL- to disable Master Power. 3. Press the P key to confirm. The POWER key now turns on or off only the device you're controlling. To enable M 1. Press and ho 2. Press VOL+ to 3. Press the P ke Channel Lo Channel lock au and 0-9 numbe when you're in than your TV to To turn chann 1. Press and h key, use yo time. 2. Wait until th both keys. 3. Press OK/EN To turn chann 1. Press and h key, use yo time. 2. Wait until th both keys. 3. Press OK/EN NOTE: The Pre feature. When Preset Channe Code Retri Once you've pro record the code this is easy. Jus boxes below. If remote or if you will need to retr writing it down If the codes are your remote to TIPS: All TV co streaming play To exit the Cod If you press an will not respon SAT•CBL•STRE POWER key bli 1. Press and h wish to retr 2. While holdi POWER key three secon 3. Release bot 4. Starting wit keypad in th key to blink code, write 5. Repeat step fifth numbe ! 1