RCA RCU403R Owner/User Manual - Page 6

Program for Satellite, Cable Box or Digital TV Converter-Direct Entry Method In order for the 3-component universal remote to control your satellite, cable box or digital TV converter, you must program it with the code that matches your component. The SAT•CBL•DTC key can be programmed to operate either a satellite receiver, cable box or digital TV converter. These instructions explain the preferred method of programming the remote-the Direct Entry method. CODE INDICATOR SEARCH LIGHT SAT• (BLINK) CBL•DTC (OFF) ON•OFF SATELLITE, CABLE BOX OR DIGITAL TV CONVERTER CODE 1. Manually turn on the satellite receiver, cable box or digital TV converter. 2. Locate the enclosed Code Lists. Find your brand in the Satellite, Cable Box or Digital TV converter codes. Note: If your brand isn't listed, use one of the Code Search methods to program this remote control (See Code Search on page 8). 3. Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key. 4. Press and release the SAT•CBL•DTC key. The indicator light blinks and then remains lit. 5. Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid four-digit code, the indicator light turns off. Note: If you enter an invalid code, the LED will flash rapidly for 2 seconds. Start over at step 3. 6. Aim the remote at your satellite receiver, cable box or digital TV converter and press the ON•OFF key. If your device turns off, you have found the correct code. 7. Enter the code in the box provided on this page for future reference. 8. If your device doesn't turn off, repeat steps 3-6 above, entering the next code for your brand. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote (See Code Search on page 8). For a description of each key on the remote control, refer to the Key Descriptions section page 3-4. 7