RCA RCU600M Owner/User Manual: RCU600M - Page 6

Program for VCR—Direct Entry Method

1.

Manually turn on the VCR.

2.

Locate the enclosed VCR Code List.

Find your brand in the VCR Codes.

Note

: If your brand isn’t listed, use one

of the Code Search methods to program

this remote control. (See section on

Code Search on page 10).

3.

Press and hold the

CODE SEARCH

key

until the indicator light illuminates.

Then release the

CODE SEARCH

key.

4.

Press and release the

VCR

key. The

indicator light blinks and then remains lit.

5.

Use the number keys on the remote to

enter the first code listed for your brand.

After you enter a valid three-digit code,

the indicator light turns off.

Note

: If you enter an invalid code, the

LED flashes rapidly for two seconds.

Start over at step 3.

6.

Aim the remote at your VCR. Press the

ON•OFF

key. If your VCR turns off, you

have found the correct code.

7.

Enter the code in the box provided on

this page for future reference.

8.

If your VCR does not turn off, repeat

steps 3-6 above, entering the next code

for your brand.

If none of the codes work or your brand

is not listed, use one of the Code Search

methods to program this remote.

(See Code Search section on page 10).

In order for the six-component universal remote to control your VCR, you

must program it with the code that matches your VCR. To program your

remote to control your VCR, follow these steps:

(BLINK)

VCR CODE

(OFF)

1.

Manually turn on the DVD/CD system.

2.

Locate the enclosed DVD or CD Code

List. Find your brand in the DVD or

CD Codes.

Note

: If your brand isn’t listed, use one

of the Code Search methods to program

this remote control. (See section on

Code Search on page 10).

3.

Press and hold the

CODE SEARCH

key

until the indicator light illuminates.

Then release the

CODE SEARCH

key.

4.

Press and release the

DVD

key. The

indicator light blinks and then remains lit.

5.

Use the number keys on the remote to

enter the first code listed for your brand.

After you enter a valid three-digit code,

the indicator light turns off.

Note

: If you enter an invalid code, the

LED flashes rapidly for two seconds.

Start over at step 3.

In order for the six-component universal remote to control your DVD or CD

systems, you must program it with the code that matches your component.

To program your remote to control your DVD/CD system, follow these steps:

(BLINK)

Program for DVD/CD Systems—

Direct Entry Method

6

CODE

SEARCH

INDICATOR

LIGHT

CODE

SEARCH

INDICATOR

LIGHT

(OFF)

ON•OFF

VCR

DVD

RCA RCU600M Owner/User Manual: RCU600M - Page 6

Program for VCR-Direct Entry Method, Program for DVD/CD Systems, Direct Entry Method - manual

Page 6 highlights