RCA RCU600M Owner/User Manual: RCU600M - Page 9

Operating AUDIO System Functions

6.

Aim the remote at the AUDIO

component. Press the

ON•OFF

key. If

your AUDIO component turns off, you

have found the correct code. If your

AUDIO component does not turn off,

repeat steps 3-6 above, entering the next

code for your brand.

7.

With your AUDIO component on, press

the

VOL+

(

VOLUME UP

) key. If the

AUDIO component responds, no

further programming is required.

8.

Enter the code in the box provided on

this page for future reference.

9.

If none of the codes work or your brand

is not listed, use one of the Code Search

methods to program this remote.

(See Code Search section on page 10).

The following is a list of instructions for operating Audio functions. Not all

functions work for all brands. Experiment with your AUDIO system to

determine which functions work with your components. See the enclosed

AUDIO Code List to operate your brand of equipment.

TURNING ON THE RECEIVER

OR MINI-SYSTEM

Point the remote control at the receiver

and press the

AUDIO

key and then the

ON•OFF

key to turn the system on.

SELECTING A

COMPONENT

INPUT

Component inputs such as a DVD

player or VCR may be selected

depending on the features of your

receiver or mini-system. Input

selection may be made either by

pressing the labeled number key

or pressing the

FUNCTION

key to

toggle through the inputs available

on your system.

Note

: You may need to experiment

with your system since manufacturers’

products do not all work in the

same manner.

USING THE NUMBER KEYS

TO CHANGE AUDIO INPUTS

To select a component, press the

number key

(1-6)

that corresponds

with the component you want to

operate (

CD, TAPE, TUNER, TV,

VIDEO 1,

or

VIDEO 2

).

USING THE FUNCTION KEY

TO CHANGE AUDIO INPUTS

To select a component, press the

FUNCTION

key until the input

you want to operate appears on

your system.

OPERA

TING THE AM·FM TUNER

1.

Press the

AUDIO

key and then the

ON•OFF


2.

Press the

TUNER

(3) key.

3.

Press the

AM·FM

key to toggle

between AM and FM.

4.

Use the Preset (

CH+/CH-

) keys to

move up and down channel presets.

OPERA

TING A HOME THEA

TER

SURROUND SOUND SYSTEM

1.

Turn the TV on.

2.

Press the

AUDIO

key and then the

ON•OFF


3.

Select the AUDIO input either by

using the labeled number keys or

the

FUNCTION

key.

4.

Press the

VOL+

or

VOL-

keys to

control volume.

Note

: The

VOLUME

keys may

operate both TV and receiver

volume at the same time. If

this presents a problem, it may be

resolved by entering the TV menu

and disabling the TV speakers.

CONTROLLING THE SURROUND

SOUND FEA

TURE

1.

Press the

DELAY+

or

DELAY-

key

to achieve the desired delay effect.

2.

Press the

DSP ON•OFF

key

to turn DSP (Digital Signal

Processing) on or off.

3.

Press the

DSP MODE

key until

the desired effect is achieved.

4.

Press the

TEST

key to listen to

speaker levels.

5. Press

FRONT

,

CENTER

, or

REAR

keys to select speakers.

6.

Press the

LEVEL+

or

LEVEL-

keys to adjust the speaker levels.

AUDIO SYSTEM CODE

9

ON•OFF

VOL+

RCA RCU600M Owner/User Manual: RCU600M - Page 9

Operating AUDIO System Functions - remote controle codes

Page 9 highlights