RCA RMW1749-SS English Manual - Page 26

Grease Filters, Light, DO NOT USE A BULB LARGER THAN 30 WATTS.

Get RCA RMW1749-SS PDF manuals and user guides View all RCA RMW1749-SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Grease Filters Filters should be cleaned at least once a month. Never operate the vent fan or oven without the filters in place. Pull down slightly on the tab toward the front of the oven and remove the filter. Repeat for the other filter. Soak the filter in a sink or dish pan filled with hot water and detergent. DO NOT use ammonia or other alkali; they will react with the filter material and darken it. Agitate and scrub with a brush to remove embedded dirt. Rinse thoroughly and shake dry. Replace by fitting the filter back into the opening. Light To replace light bulbs, first disconnect power to the oven at the circuit breaker panel or by unplugging. To release cover, remove the screw on the light cover. (See illustration.) DO NOT USE A BULB LARGER THAN 30 WATTS. Close light cover and secure with screw removed in step 2. CAUTION: Light cover may become very hot. Do not touch glass when light is on. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
26
Grease Filters
Filters should be cleaned at least once a month. Never operate the vent fan or oven without the
fil
ters
in place.
Pull down slightly on the tab toward the front of the oven and remove the
fil
ter. Repeat for the other
fil
ter.
Soak the
fil
ter in a sink or dish pan
fill
ed with hot water and detergent. DO NOT use ammonia or other
alkali; they will react with the
fil
ter material and darken it.
Agitate and scrub with a brush to remove embedded dirt.
Rinse thoroughly and shake dry.
Replace by
fi²n
g the
fil
ter back into the opening.
Light
To replace light bulbs,
fi
rst disconnect power to the oven at the circuit breaker panel or by unplugging.
To release cover, remove the screw on the light cover. (See illustra
°
on.)
DO NOT USE A BULB LARGER THAN 30 WATTS.
Close light cover and secure with screw removed in step 2.
CAUTION: Light cover may become very hot. Do not touch glass when light is on.