RCA RMW1749-SS English Manual - Page 27

Charcoal Filter, Oven Light

Page 27 highlights

Charcoal Filter Charcoal filter is used for nonvented, recirculated installation. The filter should be changed every 6 to 12 months depending on use.  Disconnect power to the oven at the circuit breaker panel or by unplugging.  Remove the louver mounting screw from the top center of the louver and push down carefully on the tab at each end of the louver to disengage it. (See illustration.)  Pull the louver away from the unit.  Change the charcoal filter.  Carefully push the louver back into place and replace the screw remove in step 2. Oven Light Remove the louver per instructions 1~3 above and charcoal filter, if used.  Open light cover located behind filter mounting by carefully pulling up on the front edge.  DO NOT USE A BULB LARGER THAN 30 WATTS.  Replace the oven light cover by carefully pushing into place. Replace the charcoal filter, if used. Push the louver back into place and replace the louver mounting screw. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

27
Charcoal Filter
Charcoal
fil
ter is used for nonvented, recirculated installa
°
on. The
fil
ter should be changed every 6 to
12 months depending on use.
Disconnect power to the oven at the circuit breaker panel or by unplugging.
Remove the louver moun
°
ng screw from the top center of the louver and push down carefully on
the tab at each end of the louver to disengage it. (See illustra
°
on.)
Pull the louver away from the unit.
Change the charcoal
fil
ter.
Carefully push the louver back into place and replace the screw remove in step 2.
Oven Light
Remove the louver per instruc
°
ons 1~3 above and charcoal
fil
ter, if used.
Open light cover located behind
fil
ter moun
°n
g by carefully pulling up on the front edge.
DO NOT USE A BULB LARGER THAN 30 WATTS.
Replace the oven light cover by carefully pushing into place. Replace the charcoal
fil
ter, if used.
Push the louver back into place and replace the louver moun
°n
g screw.