RCA RP2502 User Guide - Page 9
Outlet Power Supply, Car DC Power Supply, Adaptor, Battery Power Supply, Recharge function, Power
View all RCA RP2502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
RP2500 EN 12/4/03 5:14 PM Page 9 CD Player Power Supply EN Model Number AC/DC Adaptor RP2500 / RP2501 / RP2502 5-4079B / RP2505 / RP2507 (not included) LAD940U / LAD950U LAD70CU (Included) (230V 50Hz) Batteries AAx2 (Not Included) 2 x 1.5V IEC R6 (UM3) (Included) AC Outlet Power Supply (supplied with LAD940U / LAD950U only) You can power your CD player with an AC/DC adaptor. Refer to the table for details of the operating voltage. AC/DC adaptor is purposed for indoor use in dry rooms only. Remove the jack from the device to use it with the batteries. Note: Power is fed to the unit even when it is not functioning. To cut the power supply off, the AC/DC adaptor must be unplugged. Battery Power Supply (supplied with LAD940U / LAD950U only) Refer to the table for details of the batteries required to operate your unit. Recharge function (For LAD940U / LAD950U only) To charge Ni-Cd batteries: 1. Insert 2 rechargeable batteries into the battery compartment on the main unit. 2. Connect the main adaptor. 3. Press stop on the unit to start recharging. An battery indicator will be displayed when recharging is in progress. Car (DC) Power Supply Adaptor (For RP2505 / RP2507 only) Plug the car (DC) power supply adaptor into the DC in 4.5V jack at the rear/side of the CD player and then into the cigarette lighter receptacle in your car. 4