RCA RT2360 User Manual - Page 20

Operating your Receiver Storing radio stations: The receiver can store up to 40 radio stations in memory. You can enter every single radio station yourself or the receiver can store all available radio station automatically in an ascending order. Automatic preset storing : (FM only) 1. Select the band by pressing FM/AM 3. Press and hold the MEMORY button on the front panel or MENU on the remote control. "MEMORY" will flash and a preset number will be displayed on EN the display. TUNING MEMORY OK SOURCE SOURCE FM/AM TUNING MEMO 2- Press and hold FM/AM on the main unit for 3 seconds. "MEMORY" will be displayed in red and will blink during the automatic storing process. 4. Press TUNING UP/DOWN, while CE FM/AM TUNING MEMORY MEMORY is still flashing CE to select the desired pre- set memory location. SOURCE SOURCE FM/AM TUNING MEM 5. Press the MEMORY button on the front panel or the remote control to store frequency in selected preset location. 6. Repeat steps 1-5 to store other frequencies. Radio frequencies will be scanned and radio station stored automatically. When all available radio stations are stored or if all 40 memory locations are full, the auto preset will stop. Retrieving preset stations 1. Press FM/AM to select tuner mode NOTE Weak signal can affect the "Automatic Preset Storing function" efficiency. Adjust the antenna for the best reception for more efficient search. Manual preset 1. Select FM or AM band by pressing FM/AM repeatedly. SOURCE SOURCE FM/AM TUNING MEM 2. Press MEMORY/MENU button to enter preset setting mode (MEMORY icon shows on display), Press TUNING UP/DOWN to select preset station. AM TUNING MEMORY OK SOURCE SOURCE FM/AM TUNING MEM 2. Tune to the radio station to be stored. (see "Manual tuning" on page 16 above for details) 17