RCA RTD205 User Manual - Page 8

Magnetic shielding, Preferred surround placement, Front speaker placement - how to connect to tv

Page 8 highlights

Connections and Setup Magnetic shielding Speakers placed less than two feet from the TV set must be magnetically shielded in order to prevent picture distortion. Front and center speakers provided with this unit are magnetically shielded to protect your TV set. Note: It is not recommended to place the rear speakers and subwoofer near the TV set. Front speaker placement Follow the suggestions for speaker placement below to get the best results. Courtesy Dolby Laboratories Alignment Align the center speaker evenly with (A) or slightly behind (B) (the left and right speakers), but not ahead of them. Angle Place the left and right speakers to form a 45-degree angle with your favorite viewing position to duplicate the soundtrack mixer's perspective. Courtesy Dolby Laboratories Height The mid- and high-frequency drivers of the three front speakers should be as close as possible to the same height. This often requires placing the center speaker directly on top (A) or beneath (B) the TV set. Preferred surround placement Location If possible, place surround speakers to either side of the listening area, not behind it. Height If space permits, install surround speakers 2-3 feet above viewers. This helps to minimize localization effects. Aiming Aim surround speakers straight across the room, not down at viewers, to help create a more open, spacious surround sound field. Alternative Surround Placement Rear wall If rear wall mounting is the only choice, aim the speakers at each other (A), towards the front (B) or towards the sidewalls (C, D). Experiment with placement until sounds seem to surround you, rather than come from behind you. 6 RTD205 6 2/28/05, 10:35 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Connections and Setup
6
Magnetic shielding
Speakers placed less than two feet from the TV set must be magnetically shielded in order to
prevent picture distortion. Front and center speakers provided with this unit are magnetically
shielded to protect your TV set.
Note: It is not recommended to place the rear speakers and subwoofer near the TV set.
Courtesy Dolby Laboratories
Courtesy Dolby Laboratories
Preferred surround placement
Location
If possible, place surround speakers to either side of the
listening area, not behind it.
Height
If space permits, install surround speakers 2-3 feet above
viewers. This helps to minimize localization effects.
Aiming
Aim surround speakers straight across the room, not down
at viewers, to help create a more open, spacious surround
sound field.
Alternative Surround Placement
Rear wall
If rear wall mounting is the only choice, aim the speakers
at each other (A), towards the front (B) or towards the
sidewalls (C, D). Experiment with placement until sounds
seem to surround you, rather than come from behind you.
Front speaker placement
Follow the suggestions for speaker placement below to get the
best results.
Alignment
Align the center speaker evenly with (A) or slightly behind (B) (the
left and right speakers), but not ahead of them.
Angle
Place the left and right speakers to form a 45-degree angle with
your favorite viewing position to duplicate the soundtrack mixer’s
perspective.
Height
The mid- and high-frequency drivers of the three front speakers
should be as close as possible to the same height. This often
requires placing the center speaker directly on top (A) or beneath
(B) the TV set.
RTD205
2/28/05, 10:35 AM
6