Radio Shack 43-473 Owners Manual - Page 9
Setting the Record Mode, Setting the Sensitivity Level
UPC - 040293110109
View all Radio Shack 43-473 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
43-473.fm Page 9 Friday, August 13, 1999 9:21 AM 2. Press RECORD. Both RECORD and PLAY lock down. When RECORD is pressed down, every call made or received is recorded. Notes: • If you set REC MODE to VOX, when both parties are silent for about 5 seconds, the recorder stops recording until someone starts speaking again. • The VOLUME setting does not affect the recording level. • VU/LEVEL flashes during recording. Setting the Record Mode When REC MODE is set to VOX, the recorder begins recording when it receives sound through the microphone or phone line, and stops recording when it does not receive sound for about 5 seconds. DC 6V 300mA OFF ON MONITOR VOX NORM REC MODE STD EXT SPEED Set REC MODE to NORM to record continuously until the tape reaches the end or you press STOP/EJECT. 0 0 0 VU LEVEL MIC TCR-200 VOICE ACTIVATED TELEPHONE CASSETTE RECORDER • To temporarily stop recording, press PAUSE. To resume recording, press PAUSE again. RECORD PLAY REVIEW REWIND CUE FAST-F STOP/EJECT PAUSE Setting the Sensitivity Level When you set REC MODE to VOX, you must set the sensitivity level located on the bottom of the recorder. H (high) is the most sensitive setting and requires only a soft sound to begin recording. L (low) is the least sensitive setting and requires a louder sound to begin recording. If the tape does not stop after about 5 seconds of silence, set SENSITIVITY to M (medium) or L (low). SENSITIVITY • If the tape reaches the end during a recording, it automatically releases RECORD and PLAY, and stops. 3. To stop recording, press STOP/ EJECT. L M H CAUTION ALWAYS DISCONNECT ALL TELEPHONE LINES FROM THE WALL OUTLETS BEFORE SERVICING OR DISASSEMBLING THIS EQUIPMENT, OR REPLACING BATTERIES. 9