Reebok 1610 Treadmill English Manual - Page 16

Outside Upright Cover at an angle as you set, it against the Upright. Do not overtighten

Get Reebok 1610 Treadmill PDF manuals and user guides View all Reebok 1610 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

14. Attach the Pulse Crossbar (93) to the console assembly with six #8 x 1/2" Screws (1); start all six Screws, and then tighten them. Then, firmly tighten the four 5/16" x 3/4" Screws (4). 14 Console Assembly 4 93 1 1 4 1 15. Check the gaps between the handrail assemblies (B, D) and the console assembly. If necessary, loosen the four #8 x 3/4" Screws (2) under the handrails, slide the handrails forward against the console assembly as indicated by the arrows, and then retighten the Screws. Attach the Left Outside Upright Cover (87) and the Right Outside Upright Cover (96) to the Left and Right Uprights (89, 90) with two #8 x 3/4" Screws (2). Note: The top edge of each Outside Upright Cover needs to be inserted under the console assembly. Rotate each Outside Upright Cover at an angle as you set it against the Upright. Do not overtighten the Screws. 15 Console Assembly 87 D 2 2 2 89 B 90 2 96 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
16
14. Attach the Pulse Crossbar (93) to the console
assembly with six #8 x 1/2" Screws (1);
start all
six Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4" Screws
(4).
14
93
Console
Assembly
4
4
1
1
1
15.
Check the gaps between the handrail assem-
blies (B, D) and the console assembly.
If necessary, loosen the four #8 x 3/4" Screws
(2) under the handrails, slide the handrails for-
ward against the console assembly as indicated
by the arrows, and then retighten the Screws.
Attach the Left Outside Upright Cover (87) and
the Right Outside Upright Cover (96) to the
Left and Right Uprights (89, 90) with two #8 x
3/4" Screws (2).
Note: The top edge of each
Outside Upright Cover needs to be inserted
under the console assembly. Rotate each
Outside Upright Cover at an angle as you set
it against the Upright. Do not overtighten the
Screws.
15
89
90
2
2
87
2
B
D
Console
Assembly
2
96