Reebok 9700 Vista Treadmill Canadian English Manual - Page 13
How To Connect A Dvd Player Or A Vcr
View all Reebok 9700 Vista Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the treadmill or a VCR or DVD player to the audio/video input jacks. Note: Use CATV cable to connect to an external source such as a cable box, analog cable, satellite TV box, or VCR. No cable, antenna, or adapter is included. HOW TO CONNECT AN ANTENNA Indoor Antenna 1. Place a VHF antenna in the desired location. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm a d a p t e r . Screwdriver VHF 300 Ohm Flat Wire 300 to 75 Ohm Adapter 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the uprights. VHF Antenna 300 to 75 Ohm Adapter 75 Ohm Terminal Outdoor Antenna Note: Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your antenna and the lead-in wiring before connecting the antenna. Combination VHF/UHF Antennas 300 Ohm Flat Wire 300 to 75 Ohm Adapter 75 Ohm Terminal 75 Ohm CATV Cable 75 Ohm CATV Cable 300 Ohm Flat Wire 1. See the drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the uprights. 75 Ohm CATV Cable 1. See the drawing near the bottom of this page. Connect the 75 ohm CATV cable from the antenna to the 75 ohm antenna terminal on the treadmill frame near the uprights. HOW TO CONNECT A 75 OHM CATV CABLE 1. Connect a 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the uprights. 75 Ohm CATV Cable 75 Ohm Terminal HOW TO CONNECT AN EXTERNAL SOURCE USING A CATV CABLE 1. Connect one end of a 75 ohm CATV cable to the 75 ohm output jack on your external source. 2. Plug in the power cord of your external source. See your external source user's manual for proper grounding instructions. 3. Connect the 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the uprights. HOW TO CONNECT A DVD PLAYER OR A VCR Plug the three-pronged end of an RCA component audio/video cable into your DVD player or VCR, and plug the other end into the audio/video input jack on the back of the console base. HOW TO CONNECT A PERSONAL AUDIO/VIDEO PLAYER DIRECTLY TO THE CONSOLE Locate the audio/video plug below the television on the console, and plug it into a jack on your MP3 player, CD player, or personal video player. 13