Reebok Cyc6 English Manual - Page 10

4 Measure your heart rate if desired Refer to step 5 on page 9. Note: If your heart rate is not shown, press the reset button to reset the pulse sensor. 5 When you are finished exercising, turn off the power To turn off the power, simply wait for a few minutes. If the pedals are not moved and the console buttons are not pressed for a few minutes, the power will turn off automatically. HOW TO USE A HEART RATE PROGRAM Each heart rate program automatically adjusts the resistance of the pedals to keep your heart rate near a certain level while you exercise. Programs 7 and 8 are low-intensity fat burning programs. To burn fat, you must exercise at a low intensity level for a sustained period of time. As you exercise, pedal at a relatively slow speed; the resistance of the pedals will increase or decrease as needed to keep your heart rate near the proper level. Programs 9, 10, and 11 are moderate-intensity aerobic programs. For aerobic exercise, you must exercise at a moderate intensity level for a prolonged period of time. As you exercise, pedal at a moderate speed; the resistance of the pedals will increase or decrease as needed to keep your heart rate near the proper level. set button. The letters "AGE" and the current age setting will appear at the bottom of the display. Press the resistance + or - button to enter your age. After you have entered your age, the display will change back to the main display in about five seconds. 3 Select one of the heart rate programs Each time the power is turned on, the manual program will be selected, as shown by the "P-1" in the display. To select one of the heart rate programs, press the program button repeatedly until a "P-7," "P-8," "P-9," "P10," or "P11" appears in the display. Each heart rate program is designed to keep your heart rate near a certain percentage of your maximum heart rate while you exercise. (Your maximum heart rate is estimated by subtracting your age from 220. For example, if you are 30 years old, your maximum heart rate is 190.) Program 7 (P-7) will keep your heart rate near 50% of your maximum heart rate while you exercise, P-8 will keep your heart rate near 60% of your maximum heart rate, P-9 will keep your heart rate near 70% of your maximum heart rate, P10 will keep your heart rate near 80% of your maximum heart rate, and P11 will keep your heart rate near 90% of your maximum heart rate. WARNING: The pulse sensor may give readings lower than your actual heart rate, especially at fast pedaling speeds. Stop exercising and cool down if you feel faint or dizzy. Follow the steps below to use a heart rate program. 1 Turn on the power To turn on the power, press any button on the console. Note: If batteries were just installed, the power will already be on. 2 Enter your age into the console Before you use a heart rate program, you must enter your age into the console. First, press the age 4 Begin pedaling and follow your progress with the console display As you exercise, follow your progress with the matrix on the Matrix left side of the display. During the first ten seconds of the pro- gram, the first column of the matrix will flash. After ten seconds, the column will move to the right and the first column will continue to flash. At the end of every ten seconds, all columns will move to the right and the first column will continue to flash. Note: As the resistance level of the ped- als changes (see step 5 on page 11), the height of the flashing column will also change. Note: During a heart rate program, the resistance but- tons will not function. In addition to the matrix, the display will show your pedaling speed, the number of Calories you have burned, the elapsed time, and the distance you have pedaled. 10