Reebok R 5.10 Elliptical English Manual - Page 18

HOW TO ACTIVATE THE CONSOLE The included power adapter must be used to operate the elliptical. See HOW TO PLUG IN THE POWER ADAPTER on page 15. When the power adapter is plugged in, the displays will turn on and the console will be ready for use. HOW TO TURN OFF THE CONSOLE If the pedals do not move for several seconds, a tone will sound and the console will pause. If the pedals do not move for several minutes and the buttons are not pressed, the console will turn off and the display will be reset. When you are finished exercising, unplug the power adapter. IMPORTANT: If you do not do this, the electrical components on the elliptical may wear prematurely. HOW TO USE THE MANUAL MODE 1. Begin pedaling or press any button on the console to turn on the console. See HOW TO ACTIVATE THE CONSOLE above. 2. Select the manual mode. Each time you turn on the console, the main menu will appear. To select the manual mode, press the increase and decrease buttons next to the Enter button and highlight START. Then, press the Enter button. If you have selected a workout or the iFit Training mode, press the Menu button to return to the main menu. 3. Change the resistance of the pedals as desired. As you pedal, change the resistance of the pedals by pressing the Resistance increase and decrease buttons. Note: After you press the buttons, it will take a moment for the pedals to reach the selected resistance level. 4. Follow your progress with the display. The console offers several display modes. The display mode that you select will determine which workout information is shown. Press the Display button repeatedly to select the desired display mode. The display can show the following workout information: Calories—-This display mode will show the approximate number of calories you have burned. Profile—-When a workout is selected, this display mode will show a profile of the resistance levels for the workout. Pulse—-This display mode will show your heart rate when you use the handgrip heart rate monitor (see step 5 on page 19). Resistance—-This display mode will show the resistance level of the pedals for a few seconds each time the resistance level changes. RPM—-This display mode will show your pedaling pace, in revolutions per minute (rpm). Strides—-This display mode will show the total number of strides you have pedaled. Time—-When the manual mode is selected, this display mode will show the elapsed time. When a workout is selected, the display mode will show the time remaining in the workout instead of the elapsed time. Change the volume level of the console by pressing the volume increase and decrease buttons. 18