Reebok Rl 645 Elliptical Exerciser English Manual - Page 9
Plug the Power Cord 83 into the Power Receptacle
View all Reebok Rl 645 Elliptical Exerciser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
10.Attach the Book Rack (4) to the Console (3) with two 10 M4 x 25mm Round Head Screws (115). 4 3 115 11. Have another person hold the Console (3) near the Upright (2). Connect the Upper Wire Harness (18) to the wire harness on the Console (3). Connect the Pulse Extension Wire (17) to the pulse wire on the Console. Carefully insert all excess wiring down into the Upright (2). Attach the Console (3) to the Upright with four M4 x 16mm Screws (99). Be careful to avoid pinching the wires. 11 Do not pinch the wires during this step. 17 3 18 99 99 2 12. Plug the Power Cord (83) into the Power Receptacle 12 (82) at the rear of the elliptical exerciser. 82 83 13. Make sure that all parts of the elliptical exerciser are properly tightened. Cover the floor beneath the elliptical exerciser to protect the floor from damage. Note: Some extra hardware may be left over. 9