Reebok T 9.80 Treadmill English Manual - Page 11

Aged When The Power Is Turned On.

Get Reebok T 9.80 Treadmill PDF manuals and user guides View all Reebok T 9.80 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

11. Have a second person hold the console assembly near the Uprights (77, 100). Connect the Upright Wire (76) to the console wire extending from the console assembly. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire tie from the Upright Wire (76). Insert the excess wire into the Right Upright (100) as you set the console assembly on the Right Upright and the Left Upright (77). Be careful not to pinch any wires. 11 77 Wire Tie Console Wire Console Assembly Console Wire 76 100 76 12. Attach the console assembly to the Uprights (77, 100) with four 3/8" x 1 1/4" Patch Bolts (9) and four 3/8" Star Washers (11). Start all four Patch Bolts before tightening any of them. 12 Console Assembly 11 11 9 9 77 11 9 11 9 100 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
11
11. Have a second person hold the console assem-
bly near the Uprights (77, 100).
Connect the Upright Wire (76) to the console
wire extending from the console assembly.
See
the inset drawing. The connectors should
slide together easily and snap into place.
If
they do not, turn one connector and try again.
IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (76).
Insert the excess wire into the Right Upright
(100) as you set the console assembly on the
Right Upright and the Left Upright (77).
Be
careful not to pinch any wires.
Console
Assembly
11
100
Wire
Tie
Console
Wire
76
76
Console
Wire
77
12. Attach the console assembly to the Uprights
(77, 100) with four 3/8" x 1 1/4" Patch Bolts (9)
and four 3/8" Star Washers (11).
Start all four
Patch Bolts before tightening any of them.
Console
Assembly
12
100
11
11
9
9
11
9
9
77
11