Reebok T9.85es Elliptical English Manual - Page 9
Tip: Avoid pinching the Upper Wire Harness
View all Reebok T9.85es Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Apply a small amount of grease to the axle of the left Pedal Arm Bracket (43). Attach the left 7 Pedal Leg (8) to the left Pedal Arm Bracket with two M8 x 45mm Button Bolts (70) and two M8 Nylon Locknuts (63). Grease Attach the right Pedal Leg (8) in the same way. 8 70 43 8 63 8. Tip: Avoid pinching the Upper Wire Harness (81) during this step. Attach the Handlebar 8 (90) to the Upright (2) with four M6 x 32mm Patch Screws (96). 96 96 81 2 90 9. While a second person holds the Console (3) near the Upright (2), connect the three wires on the console to the Upper Wire Harness (81), to the Pulse Wire (92), and to the Ground Wire (97). Insert the excess wire into the Upright. Tip: Avoid pinching the wires during this step. See the inset drawing. Attach the Console (3) to the Upright (2) with four M4 x 16mm Round Head Screws (95). 9 3 Avoid pinching the wires during this step Wires 81 2 3 92 97 2 95 9