Home » Ricoh Manuals » Multifunction Devices » Ricoh AFICIO 1515 MF » Manual Viewer

Ricoh AFICIO 1515 MF Printer Reference - Page 41

Add New Hardware Wizard

View all Ricoh AFICIO 1515 MF manuals

Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Installing the Software E Hold down the left {SHIFT} key and insert the CD-ROM into the CD-ROM drive. Windows XP and Windows Server 2003 Keep the left {SHIFT} key held down until the computer has finished accessing the CD-ROM. A Connect the machine and the computer using the IEEE 1394 in- terface cable. If the Auto Run program starts, click [Cancel], and then click [Exit]. The [Found New Hardware Wizard] dialog box appears. 2 F Click [Browse]. B Confirm that "This wizard helps G Select the printer driver you want to install. Each printer driver is stored in the following folders: • PCL 6: \DRIVERS\PCL6\ WIN2K_XP\(Language)\ DISK1 • PCL 5e: \DRIVERS\PCL5E\ WIN2K_XP\(Language)\ DISK1 you install software for: (printer name)" is displayed, and click [Install from a list or specific location (Advanced)], and then click [Next]. "Please choose your search and installation option." appears. C Select the [Search for the best driver in these locations.] check box, and [Include this location in the search:] • RPCS™: \DRIVERS\RPCS\ WIN2K_XP\(Language)\ DISK1 • PostScript 3: \DRIVERS\PS\ WIN2K_XP\(Language)\ DISK1 H Click [Open]. check box. D Install the printer driver following the same procedure as in steps E to J for Windows 2000. Note ˆ When installation is complete, a printer with its port directed to I Click [OK]. A printer model selection dialog box appears. "1394_00n" appears in the [Printers and Faxes] folder. ("n" is the number of printers connected.) J Follow the instructions on the screen. Note ˆ When installation is complete, the printer with its port directed -Disabling the Device ™ If [Add New Hardware Wizard] appears every time you restart the com- to "1394_00n" appears in the [Printers] folder. ("n" is the number of printers connected.) puter using an operating system that does not support SCSI print, or plug in/take out the cable, disable the device with the following procedure: 33

Section	Page
Manuals for This Machine	5
Manuals for This Machine	5
Manuals for This Machine	5
The following manuals describe the operational procedures of this machine. For particular functio...	5
The following manuals describe the operational procedures of this machine. For particular functio...	5
Manuals provided are specific to machine type.	5
Manuals provided are specific to machine type.	5
Adobe Acrobat Reader is necessary to view the manuals as a PDF file.	5
Two CD-ROMs are provided:	5
General Settings Guide	5
General Settings Guide	5
General Settings Guide	5
Provides an overview of the machine and describes System Settings (paper trays, Key Operator Tool...	5
Provides an overview of the machine and describes System Settings (paper trays, Key Operator Tool...	5
Refer to this manual for Address Book procedures such as registering fax numbers, e-mail addresse...	5
Network Guide (PDF file - CD-ROM1)	5
Network Guide (PDF file - CD-ROM1)	5
Network Guide (PDF file - CD-ROM1)	5
Describes procedures for configuring the machine and computers in a network environment.	5
Describes procedures for configuring the machine and computers in a network environment.	5
Copy Reference	5
Copy Reference	5
Copy Reference	5
Describes operations, functions, and troubleshooting for the machine’s copier function.	5
Describes operations, functions, and troubleshooting for the machine’s copier function.	5
Facsimile Reference <Basic Features>	5
Facsimile Reference <Basic Features>	5
Facsimile Reference <Basic Features>	5
Describes operations, functions, and troubleshooting for the machine’s facsimile function.	5
Describes operations, functions, and troubleshooting for the machine’s facsimile function.	5
Facsimile Reference <Advanced Features>	5
Facsimile Reference <Advanced Features>	5
Facsimile Reference <Advanced Features>	5
Describes advanced functions and settings for key operators.	5
Describes advanced functions and settings for key operators.	5
Printer Reference 1 (this manual)	5
Printer Reference 1 (this manual)	5
Printer Reference 1 (this manual)	5
Describes system settings and operations for the machine’s printer function.	5
Describes system settings and operations for the machine’s printer function.	5
Printer Reference 2 (PDF file - CD-ROM1)	5
Printer Reference 2 (PDF file - CD-ROM1)	5
Printer Reference 2 (PDF file - CD-ROM1)	5
Describes operations, functions, and troubleshooting for the machine’s printer function.	5
Describes operations, functions, and troubleshooting for the machine’s printer function.	5
Scanner Reference (PDF file - CD-ROM1)	5
Scanner Reference (PDF file - CD-ROM1)	5
Scanner Reference (PDF file - CD-ROM1)	5
Describes operations, functions, and troubleshooting for the machine’s scanner function.	5
Describes operations, functions, and troubleshooting for the machine’s scanner function.	5
Manuals for DeskTopBinder V2 Lite	6
Manuals for DeskTopBinder V2 Lite	6
Manuals for DeskTopBinder V2 Lite	6
DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled “Scanner Driver & Document Mana...	6
DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled “Scanner Driver & Document Mana...	6
• DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2)	6
• DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2)	6
• DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2)	6
Describes installation of, and the operating environment for DeskTopBinder V2 Lite in detail. Thi...	6
• DeskTopBinder V2 Introduction Guide (PDF file - CD-ROM2)	6
• DeskTopBinder V2 Introduction Guide (PDF file - CD-ROM2)	6
Describes operations of DeskTopBinder V2 Lite and provides an overview of its functions. This gui...	6
• Auto Document Link Guide (PDF file - CD-ROM2)	6
• Auto Document Link Guide (PDF file - CD-ROM2)	6
Describes operations and functions of Auto Document Link installed with DeskTopBinder V2 Lite. Th...	6
Manuals for ScanRouter V2 Lite	6
Manuals for ScanRouter V2 Lite	6
Manuals for ScanRouter V2 Lite	6
ScanRouter V2 Lite is a utility included on the CD-ROM labeled “Scanner Driver & Document Managem...	6
ScanRouter V2 Lite is a utility included on the CD-ROM labeled “Scanner Driver & Document Managem...	6
• ScanRouter V2 Lite Setup Guide (PDF file - CD-ROM2)	6
• ScanRouter V2 Lite Setup Guide (PDF file - CD-ROM2)	6
• ScanRouter V2 Lite Setup Guide (PDF file - CD-ROM2)	6
Describes installation of, settings, and the operating environment for ScanRouter V2 Lite in deta...	6
• ScanRouter V2 Lite Management Guide (PDF file - CD-ROM2)	6
• ScanRouter V2 Lite Management Guide (PDF file - CD-ROM2)	6
Describes delivery server management and operations, and provides an overview of ScanRouter V2 Li...	6
Other manuals	6
Other manuals	6
• PostScript 3 Supplement (PDF file - CD-ROM1)	6
• PostScript 3 Supplement (PDF file - CD-ROM1)	6
• PostScript 3 Supplement (PDF file - CD-ROM1)	6
• PostScript 3 Supplement (PDF file - CD-ROM1)	6
• UNIX Supplement (available from an authorized dealer, or as a PDF file on our Web site)	6
• UNIX Supplement (available from an authorized dealer, or as a PDF file on our Web site)	6
TABLE OF CONTENTS	7
TABLE OF CONTENTS	7
Manuals for This Machine i	7
How to Read This Manual	9
How to Read This Manual	9
How to Read This Manual	9
Symbols	9
Symbols	9
In this manual, the following symbols are used:	9
In this manual, the following symbols are used:	9
This symbol indicates a potentially hazardous situation which, if instructions are not followed, ...	9
This symbol indicates a potentially hazardous situation which, if instructions are not followed, ...	9
* The statements above are notes for your safety.	9
If this instruction is not followed, paper might misfeed, originals might be damaged, or data mig...	9
This symbol indicates prior knowledge or preparation is required before operation.	9
This symbol indicates precautions for operation, or actions to take after mal-operation.	9
This symbol indicates numerical limits, functions that cannot be used together, or conditions in ...	9
This symbol indicates a reference.	9
Keys and buttons that appear on the computer's display.	9
Keys and buttons that appear on the computer's display.	9
Keys and buttons that appear on the computer's display.	9
Keys that appear on the machine's display.	9
Keys built into the machine's control panel.	9
Keys built into the machine's control panel.	9
Keys built into the machine's control panel.	9
Keys on the computer's keyboard.	9
Names of Major Components and Software	10
Names of Major Components and Software	10
The following software products are referred to using a general name:	10
The following software products are referred to using a general name:	10
• DeskTopBinder V2 Lite and DeskTopBinder V2 professionalÆ DeskTopBinder V2 Lite/professional	10
• DeskTopBinder V2 Lite and DeskTopBinder V2 professionalÆ DeskTopBinder V2 Lite/professional	10
• DeskTopBinder V2 Lite and DeskTopBinder V2 professionalÆ DeskTopBinder V2 Lite/professional	10
• ScanRouter V2 Lite and ScanRouter V2 professional (optional)Æ ScanRouter V2 Lite/professional	10
• ScanRouter V2 Lite and ScanRouter V2 professional (optional)Æ ScanRouter V2 Lite/professional	10
1. Getting Started	11
1. Getting Started	11
Control Panel	11
Control Panel	11
<GRAPHIC>	11
<GRAPHIC>	11
<GRAPHIC>	11
Printer	11
Printer	11
Printer	11
Printer	11
Press to activate the printer function.	11
2. Indicators	11
2. Indicators	11
Displays errors and machine status.	11
h: Error indicator. See	11
B: Load Paper indicator. See	11
D: Add Toner indicator. See	11
3. Display	11
3. Display	11
Displays operation status and messages.	11
4. Selection keys	11
4. Selection keys	11
Correspond to items on the display. Press to select the corresponding item.	11
5. Scroll keys	11
5. Scroll keys	11
Press to select an item.	11
U	11
U	11
T	11
T	11
V	11
V	11
W	11
W	11
User Tools/Counter	11
User Tools/Counter	11
User Tools/Counter	11
Press to change default or operation parameters according to requirement.	11
Clear/Stop	11
Clear/Stop	11
Clear/Stop	11
Clear: clears an entered numeric value.	11
8. Main power indicator and On indicator	11
8. Main power indicator and On indicator	11
The main power indicator lights when the main power switch is turned on. The On indicator lights ...	11
9. Operation switch	11
9. Operation switch	11
Press to turn the power on. The On indicator lights. To turn the power off, press again.	11
This key is inactivate during printing or while setting printer defaults.	11
This key is inactivate during printing or while setting printer defaults.	11
Online	11
Online	11
Online	11
Press to switch the printer between online and offline.	11
11. Data In indicator	11
11. Data In indicator	11
Blinks while the printer is receiving data from a computer. Lights when there is data remaining t...	11
Cancel	11
Cancel	11
Cancel	11
Press to cancel an operation or return to the previous display.	11
OK	11
OK	11
OK	11
Press to set a selected item or entered numeric value.	11
14. Number keys	11
14. Number keys	11
Press to enter numeric values.	11
Reading the Display and Using Keys	12
Reading the Display and Using Keys	12
This section explains how to read the display and using the selection key for the initial display.	12
This section explains how to read the display and using the selection key for the initial display.	12
The copy display is set as the default screen when the machine is turned on. You can change the s...	12
The copy display is set as the default screen when the machine is turned on. You can change the s...	12
The copy display is set as the default screen when the machine is turned on. You can change the s...	12
<GRAPHIC>	12
<GRAPHIC>	12
1. Selection keys	12
1. Selection keys	12
1. Selection keys	12
Correspond to the function items at the bottom line on the display.	12
Example: Basic screen	12
When the instruction \	12
Cancel	12
Cancel	12
Cancel	12
Press to cancel an operation or return to the previous display.	12
OK	12
OK	12
OK	12
Press to set a selected item or entered numeric value.	12
4. Scroll keys	12
4. Scroll keys	12
Press to move the cursor in each direction, step by step.	12
When the	12
2. Preparing to Print	13
2. Preparing to Print	13
This section gives instructions for connecting the machine and computer, configuring the machine,...	13
This section gives instructions for connecting the machine and computer, configuring the machine,...	13
When operating the machine with a USB connection, parallel connection, or IEEE 1394 (SCSI print) ...	13
When operating the machine with a USB connection, parallel connection, or IEEE 1394 (SCSI print) ...	13
When operating the machine with a USB connection, parallel connection, or IEEE 1394 (SCSI print) ...	13
• Connect the machine and computer using a USB cable, a parallel cable, or an IEEE 1394 (SCSI pri...	13
• Connect the machine and computer using a USB cable, a parallel cable, or an IEEE 1394 (SCSI pri...	13
• Connect the machine and computer using a USB cable, a parallel cable, or an IEEE 1394 (SCSI pri...	13
• Connect the machine and computer using a USB cable, a parallel cable, or an IEEE 1394 (SCSI pri...	13
For more information, see	13
For more information, see	13
• Install a printer driver from the CD-ROM.	13
• Install a printer driver from the CD-ROM.	13
For more information, see	13
For more information, see	13
When operating the machine under a network environment	13
When operating the machine under a network environment	13
• Configure the network using the machine's control panel.	13
• Configure the network using the machine's control panel.	13
• Configure the network using the machine's control panel.	13
• Configure the network using the machine's control panel.	13
For more information, see \	13
For more information, see \	13
• Install a printer driver and other utilities from the CD-ROM.	13
• Install a printer driver and other utilities from the CD-ROM.	13
For more information, see	13
For more information, see	13
\	13
\	13
Preparing the Machine	14
Preparing the Machine	14
Connecting the Machine	14
Connecting the Machine	14
Connection:Parallel interface connection	14
Connection:IEEE 1394 interface board connection	14
Connection:Ethernet board connection	14
Connection:USB connection	14
For information about connection using Ethernet and wireless LAN, see \	14
For information about connection using Ethernet and wireless LAN, see \	14
For information about connection using Ethernet and wireless LAN, see \	14
For information about connection using Bluetooth	14
Requirements	14
Requirements	14
Before using this machine, make sure all environmental and electrical requirements are met. Conne...	14
Before using this machine, make sure all environmental and electrical requirements are met. Conne...	14
Make sure all cables, connectors, and electrical outlets necessary to attach the machine to the h...	14
Connecting the Machine to the host using a USB cable	14
Connecting the Machine to the host using a USB cable	14
You can connect the machine to the host computer using a USB interface cable.	14
You can connect the machine to the host computer using a USB interface cable.	14
This machine does not come with a USB interface cable. Make sure you purchase the appropriate cab...	14
Follow the procedure below to connect the machine to the host computer using a USB interface cable.	14
Follow the procedure below to connect the machine to the host computer using a USB interface cable.	14
A Connect the USB 2.0 interface cable to the USB port on the right side of the machine's back cover.	14
A Connect the USB 2.0 interface cable to the USB port on the right side of the machine's back cover.	14
A Connect the USB 2.0 interface cable to the USB port on the right side of the machine's back cover.	14
<GRAPHIC>	14
B Connect the other end to the USB port on the host computer.	14
The machine and computer are now connected. The printer driver must be installed next. For detail...	14
The USB 2.0 interface is supported by Windows 98 SE/Me, Windows 2000/XP, Mac OS 9.x, and Mac OS X.	14
The USB 2.0 interface is supported by Windows 98 SE/Me, Windows 2000/XP, Mac OS 9.x, and Mac OS X.	14
Connecting the Machine to the host using the parallel cable/IEEE 1394 (SCSI print) cable	15
Connecting the Machine to the host using the parallel cable/IEEE 1394 (SCSI print) cable	15
Connect the machine to the host computer using the optional IEEE 1284 interface board or optional...	15
Connect the machine to the host computer using the optional IEEE 1284 interface board or optional...	15
The machine's parallel interface is a standard bidirectional interface. It requires an IEEE 1284 ...	15
Do not use a parallel cable that is longer than 3 meters (10 feet).	15
Do not use a parallel cable that is longer than 3 meters (10 feet).	15
Do not use a parallel cable that is longer than 3 meters (10 feet).	15
Rating voltage of the interface connector: Max. DC 5V	15
Follow the procedure below to connect the machine to the host computer.	15
Before connecting the machine to a computer using a parallel interface cable, make sure the machi...	15
Before connecting the machine to a computer using a parallel interface cable, make sure the machi...	15
Be sure to use a specified interface cable. Other cables may cause radio interference.	15
A Turn off the main power switches of the machine and computer.	15
A Turn off the main power switches of the machine and computer.	15
A Turn off the main power switches of the machine and computer.	15
Before turning off the main power switch, see “Turning Off the Power”,	15
Before turning off the main power switch, see “Turning Off the Power”,	15
B Plug the cable into the connector on the machine’s interface.	15
B Plug the cable into the connector on the machine’s interface.	15
Parallel Connection	15
Parallel Connection	15
<GRAPHIC>	15
IEEE 1394 (SCSI print) Connection	15
<GRAPHIC>	15
C Plug the other end of the cable into the connector on the computer’s interface.	15
D Turn on the machine's main power switch.	15
D Turn on the machine's main power switch.	15
E Turn on the computer.	15
E Turn on the computer.	15
When using Windows 95/98 SE/Me/2000/XP or Windows Server 2003, a printer driver installation scre...	15
When using Windows 95/98 SE/Me/2000/XP or Windows Server 2003, a printer driver installation scre...	15
The machine and computer are now connected. The printer driver must be installed next. For inform...	15
Setting Paper on the Bypass Tray	16
Setting Paper on the Bypass Tray	16
Bypass tray	16
Custom size paper:printing, bypass tray	16
This section gives instructions for setting paper on the bypass tray. Use the bypass tray to prin...	16
This section gives instructions for setting paper on the bypass tray. Use the bypass tray to prin...	16
For details about setting paper in the paper tray, see	16
For details about setting paper in the paper tray, see	16
For details about setting paper in the paper tray, see	16
When loading letterhead paper, pay attention to its orientation. See “Orientation-Fixed Paper or ...	16
When loading letterhead paper, pay attention to its orientation. See “Orientation-Fixed Paper or ...	16
Paper within the following dimensions can be set in the bypass tray:	16
Be sure to set the paper with the side you want to print facing down in the bypass tray.	16
When loading OHP transparencies or thick paper in the bypass tray, make the paper setting using t...	16
The number of sheets that can be loaded in the bypass tray depends on the paper type.	16
The following functions are disabled when printing from the bypass tray:	16
The following functions are disabled when printing from the bypass tray:	16
When printing using the printer function, original images are always rotated by 180 degrees (the ...	16
When printing using the printer function, original images are always rotated by 180 degrees (the ...	16
Be sure to set the paper size using the printer driver when printing data from the computer. The ...	16
A Open the bypass tray.	16
A Open the bypass tray.	16
A Open the bypass tray.	16
<GRAPHIC>	16
B Adjust the paper guides to the paper size.	16
If the paper guides are not flush against the paper, skewed images or paper misfeeds might occur.	16
If the paper guides are not flush against the paper, skewed images or paper misfeeds might occur.	16
C Gently insert paper face down into the bypass tray.	17
C Gently insert paper face down into the bypass tray.	17
<GRAPHIC>	17
<GRAPHIC>	17
1. Extender	17
1. Extender	17
1. Extender	17
2. Paper guides	17
2. Paper guides	17
Do not stack paper over the limit mark, otherwise a skewed image or misfeeds might occur.	17
Do not stack paper over the limit mark, otherwise a skewed image or misfeeds might occur.	17
Open out the extender to support paper sizes larger than A4 L, 81/2\	17
Fan the paper to get air between the sheets to avoid a multi-sheet feed.	17
When setting an OHP transparency, make sure that its front and back sides are properly positioned.	17
Select paper type when printing onto OHP transparencies or thick paper (over 105g/m	17
Select paper type when printing onto envelopes. For details, see	17
D Select the paper size.	17
D Select the paper size.	17
You can set paper size using the printer driver. The following procedures are not necessary when ...	17
You can set paper size using the printer driver. The following procedures are not necessary when ...	17
The paper size set using the printer driver has priority over that set using the control panel.	17
When the printer driver is not used, make settings using the control panel.	17
For printer driver settings, see the printer driver Help.	17
For printer driver settings, see the printer driver Help.	17
For details about setting custom sizes, see	17
A Press the	17
A Press the	17
A Press the	17
B Select	17
B Select	17
<GRAPHIC>	17
C Select	17
<GRAPHIC>	18
D Select	18
<GRAPHIC>	18
E Select the paper size using	18
<GRAPHIC>	18
When printing onto thick paper or OHP transparencies, select the paper type. For details, see	18
When printing onto thick paper or OHP transparencies, select the paper type. For details, see	18
F Press the	18
F Press the	18
Setting custom size paper	18
Setting custom size paper	18
Custom size paper	18
Custom sizes can also be set using the printer driver. The following procedures are not necessary...	18
Custom sizes can also be set using the printer driver. The following procedures are not necessary...	18
Custom sizes can also be set using the printer driver. The following procedures are not necessary...	18
Custom size settings set using the printer driver have priority over those set using the machine'...	18
When the printer driver is not used, make settings using the control panel.	18
For printer driver settings, see the printer driver Help.	18
For printer driver settings, see the printer driver Help.	18
A Press the	18
A Press the	18
A Press the	18
B Select	18
B Select	18
<GRAPHIC>	18
C Select	18
<GRAPHIC>	18
D Select	18
<GRAPHIC>	18
E Select	18
<GRAPHIC>	18
F Enter the vertical size of the paper using the number keys, and then press the	18
<GRAPHIC>	19
G Enter the horizontal size of the paper using the number keys, and then press the	19
<GRAPHIC>	19
H Press the	19
Setting thick paper or OHP transparencies	19
Setting thick paper or OHP transparencies	19
Thick Paper:printing, bypass tray	19
OHP Transparencies:printing, bypass tray	19
Paper settings can also be set using the printer driver. The following procedures are not necessa...	19
Paper settings can also be set using the printer driver. The following procedures are not necessa...	19
Paper settings can also be set using the printer driver. The following procedures are not necessa...	19
Paper size settings set using the printer driver have priority over those set using the machine's...	19
When the printer driver is not used, make settings using the control panel.	19
For printer driver settings, see the printer driver Help.	19
For printer driver settings, see the printer driver Help.	19
A Press the	19
A Press the	19
A Press the	19
B Select	19
B Select	19
<GRAPHIC>	19
C Select	19
<GRAPHIC>	19
D Select	19
<GRAPHIC>	19
E Select	19
<GRAPHIC>	19
F Press the	19
Settings made remain valid until they are reset again. After printing on OHP transparencies or th...	19
Settings made remain valid until they are reset again. After printing on OHP transparencies or th...	19
Setting envelopes	20
Setting envelopes	20
A Press the	20
A Press the	20
A Press the	20
A Press the	20
B Select	20
B Select	20
<GRAPHIC>	20
C Select	20
<GRAPHIC>	20
D Select	20
<GRAPHIC>	20
E Select	20
<GRAPHIC>	20
F Press the	20
G Select	20
G Select	20
<GRAPHIC>	20
H Select	20
<GRAPHIC>	20
I Select	20
<GRAPHIC>	20
J Select the paper envelope size from	20
<GRAPHIC>	20
K Press the	20
Installing the Software	21
Installing the Software	21
This manual assumes you are familiar with general Windows procedures and practices. If you are no...	21
This manual assumes you are familiar with general Windows procedures and practices. If you are no...	21
The procedure for installing the printer driver depends on the connection with the computer. With...	21
The procedure for installing the printer driver depends on the connection with the computer. With...	21
• For details about the parallel/network connection, see	21
• For details about the parallel/network connection, see	21
• For details about the parallel/network connection, see	21
• For details about the USB connection, see	21
• For details about the USB connection, see	21
• For details about the IEEE 1394 connection (SCSI print), see	21
• For details about the IEEE 1394 connection (SCSI print), see	21
Auto Run	21
Auto Run	21
Printer driver:Auto Run	21
Inserting the CD-ROM into the CD- ROM drive starts the installer automatically. The installer hel...	21
Inserting the CD-ROM into the CD- ROM drive starts the installer automatically. The installer hel...	21
If “plug and play” starts, click	21
If “plug and play” starts, click	21
Auto Run might not work automatically with certain operating system settings. If this happens, la...	21
If you want to cancel Auto Run, hold down the	21
If your operating system is Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, installing s...	21
If your operating system is Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, installing s...	21
The following table shows the printer drivers and software that can be installed using Auto Run:	22
<TABLE>	22
<TABLE>	22
<TABLE>	22
<TABLE BODY>	22
<TABLE ROW>	22
Auto Run *1	22
<TABLE ROW>	22
Quick Install	22
Add Printer and Utility Wizard	22
<TABLE ROW>	22
Network connection with TCP/IP	22
Parallel connection	22
<TABLE ROW>	22
PCL 6 printer driver	22
m	22
m	22

Match case Limit results 1 per page

Installing the Software

Hold down the left

{

SHIFT

}

key

and insert the CD-ROM into the

CD-ROM drive.

Keep the left

{

SHIFT

}

key held

down until the computer has fin-

ished accessing the CD-ROM.

If the Auto Run program starts,

click

[

Cancel

]

, and then click

[

Exit

]

Click

[

Browse

]

Select the printer driver you want

to install. Each printer driver is

stored in the following folders:

•

PCL 6:

\DRIVERS\PCL6\

WIN2K_XP\(Language)\

DISK1

•

PCL 5e:

\DRIVERS\PCL5E\

WIN2K_XP\(Language)\

DISK1

•

RPCS™:

\DRIVERS\RPCS\

WIN2K_XP\(Language)\

DISK1

•

PostScript 3:

\DRIVERS\PS\

WIN2K_XP\(Language)\

DISK1

Click

[

Open

]

Click

[

]

A printer model selection dialog

box appears.

Follow the instructions on the

screen.

Note

When installation is complete,

the printer with its port directed

to “1394_00n” appears in the

[

Printers

]

folder. (“n” is the num-

ber of printers connected.)

Windows XP and Windows Server

2003

Connect the machine and the

computer using the IEEE 1394 in-

terface cable.

The

[

Found New Hardware Wizard

]

di-

alog box appears.

Confirm that “This wizard helps

you install software for: (printer

name)” is displayed, and click

[

In-

stall from a list or specific location (Ad-

vanced)

]

, and then click

[

]

“Please choose your search and in-

stallation option.” appears.

Select the

[

Search for the best driver

in these locations.

]

check box, and

[

Include this location in the search:

]

check box.

Install the printer driver follow-

ing the same procedure as in steps

for Windows 2000.

Note

When installation is complete, a

printer with its port directed to

“1394_00n” appears in the

[

Printers and Faxes

]

folder. (“n” is

the number of printers connect-

ed.)

Disabling the Device

[

Add New Hardware Wizard

]

ap-

pears every time you restart the com-

puter using an operating system that

does not support SCSI print, or plug

in/take out the cable, disable the de-

vice with the following procedure: