Ricoh AFICIO 1515 MF Network Guide - Page 38
WINS Configuration, IP over 1394, SCSI print SBP-2, Bidirectional SCSI print, Host Name, Domain Name - service mode
View all Ricoh AFICIO 1515 MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Setting Up the Machine on a Network ❒ When you use the IEEE 1394 interface on a network, you cannot use the Ethernet interface in the same domain. To use both interfaces in the same domain, set different values for [Sub-net Mask:]. ❒ The physical address (MAC address) also appears. ❖ WINS Configuration 3 You can specify the WINS server settings. • On If [On] is selected, specify the [Server] IP address as "xxx.xxx.xxx.xxx" ("xxx" indicates a number). If DHCP is in use, specify [Scope ID]. • WINS Server:000.000.000.000 • Scope ID • Off Limitation ❒ Enter [Scope ID] using up to 31 alphanumeric characters. Note ❒ Default: Off ❖ IP over 1394 When you use the IP over 1394 function of the IEEE 1394 interface to connect the machine to the network, or you print from computer with the IP over 1394 driver, you must specify [Active]for [IP over 1394]. • Active • Inactive Limitation ❒ Printing with IP over 1394 is possible under Windows Me/XP and Windows Server 2003. 30 Note ❒ Default: Active ❖ SCSI print (SBP-2) When you print using the SCSI print client function supported by Windows 2000, Windows XP, or Windows Server 2003, you must set [SCSI print (SBP-2)]. • Active • Inactive Limitation ❒ The IEEE 1394 interface can be used when Windows 2000 Service Pack 1 or later is installed. If the Service Pack is not installed, only one SCSI print device is connectable via 1394 bus. Note ❒ Default: Active ❖ Bidirectional SCSI print Specifies the printer's response mode etc. for status requests when using the IEEE 1394 interface. • On • Off Note ❒ Default: On ❒ If this is set to [Off], bidirectional communication will not work. ❖ Host Name Specify the host name. ❖ Domain Name Specify the domain name.