Ricoh AP410 Support Guide - Page 18

G112/G113/G116 Product Support Guide Service Information: Firmware Structure Model G112 G112 G112 G112 G112 G113, G116 G113, G116 G113, G116 G113, G116 G113, G116 G113, G116 G113, G116 G113 G116 Firmware Type Controller, 3 PCMCIA Cards required Controller 1, Platform & Rescue Controller 2, Printer Controller 3, Web Support & Network Engine, 1 PCMCIA card required System, SD Card Printer, SD Card Websys, SD Card NCS, SD Card Netfile, SD Card Font, SD Card Engine, SD Card DESS, SD Card Service Programs to Note SP Mode SP 5-907 SP 5-104 SP 5-810 SP 5-930 Description Plug and Play A3/DLT Double Count (G116 only) Fusing Error Clear Meter Charge Mode Note Savin/Gestetner/Lanier Branding. Requires selection at install. No / Yes Turn main power OFF/ON after SP. Enabled: • "Replace Maintenance Kit" not displayed. Technician replaces maintenance kit items. • The meter charge counter is displayed immediately after the Menu key is pressed. • Technician must reset PM counter after finishing PM. Disabled: • "Replace Maintenance Kit" is displayed on the operation panel when the PM counter runs out. The user replaces the maintenance kit items. • The meter charge counter is not displayed after the Menu key is pressed. • The PM counter resets automatically after the user replaces the fusing unit. Branding: Ricoh version machines: No branding necessary. Savin/Gestetner/Lanier: You must adhere the model label (provided) to the front cover and set the Plug and Play name with SP 5-907 (SP available to technician only). V2.0 9/1/2006 Page 18 of 19