Ricoh Aficio MP 4000SPF General Settings Guide - Page 79
File Transfer, Delivery Option, Capture Server IP Address, Fax RX File Transmission
View all Ricoh Aficio MP 4000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
File Transfer File Transfer This section describes the user tools in the File Transfer menu under System Settings. Default settings are shown in bold type. Delivery Option Enables or disables sending stored or scanned documents to the ScanRouter delivery server. 2 The default setting is Off. Specify this option when selecting whether or not to use the ScanRouter delivery software. If you do, you will have to preregister I/O devices in the ScanRouter delivery software. Capture Server IP Address Specify the capture server IPv4 address. This setting appears when the media link board is installed, and when the capture function is being used by the ScanRouter delivery software. Fax RX File Transmission Specify how to deliver fax files received via the different lines. • Setting per Line Specifies whether or not received fax documents are sent to the ScanRouter delivery software for each fax line. The default setting for Line 1 is Do not Deliver. The default setting for Line 2 is Do not Deliver. The default setting for Line 3 is Do not Deliver. • IP-Fax The lines appear according to the operating environment. • RX File Delivery Specifies whether or not received fax documents are sent to the ScanRouter delivery software for each fax line. The default setting is Do not Deliver. • Print at Deliver Specify whether or not received fax documents sent to the ScanRouter delivery software should also be printed at the same time. The default setting is Do not Print. • File to Deliver Specify whether all received fax documents or only received fax documents that include delivery codes (documents with an ID or SUB/SEP codes) are sent to the ScanRouter delivery software. The default setting is All Files. 77