Ricoh Aficio MP 6002 Manuals - Page 221
Use Web Image Monitor to set, LLMNR of IPv6 to [Active]. - xp driver
View all Ricoh Aficio MP 6002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
When Messages Are Displayed on Your Computer Screen Message Causes Solutions "Scanner is not available. Check the scanner connection status." The machine is not connected to the network correctly. • Check whether the machine is connected to the network correctly. • Deselect the personal firewall function of the client computer. For details about firewall, see Windows Help. • Use an application such as telnet to make sure SNMPv1 or SNMPv2 is set as the machine's protocol. For details about how to check this, see "Remote Maintenance Using telnet", Connecting the Machine/ System Settings . "Scanner is not available. Check the scanner connection status." Network communication is not available because the machine's IP address could not be obtained from the host name. If only "IPv6" is set to [Active], the IPv6 address might not be obtained. • Check whether the machine's host name is specified in the Network Connection Tool. For the WIA driver, check the [Network Connection] tab in the properties. • Use Web Image Monitor to set "LLMNR" of "IPv6" to [Active]. • In Windows XP, IPv6 address cannot be obtained from the host name. Specify the machine's IPv6 address in the Network Connection Tool. "Scanner is not ready. Check the scanner and the options." The ADF cover is open. Check whether the ADF cover is closed. "The name is already in use. Check the registered names." You tried to register a name that is already in use. Use another name. 219