Ricoh Aficio MP 7500 S/P Network Guide - Page 118
Login to the file server failed.The print server, is not registered or a password is specified.
View all Ricoh Aficio MP 7500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Monitoring and Configuring the Printer 2 110 Message Problem and solutions SMTPC: failed to connect smtp server. Connection to the SMTP server failed. This could be because no connection to the network has been established, or the network configuration is incorrect, so there is no response from the SMTP server, or the specified SMTP server name is incorrect, or the specified SMTP server IP address could not be found in the DNS server, or a server other than the SMTP server has been specified, or the specified SMTP server port number is incorrect. Check the DNS Server's IP address and SMTP server's IP address, or the SMTP servername and SMTP port number, or the SMTP server's SMTP port number, or the network connection and configuration. SMTPC: username or password wasn't correct. [response code] (information) Connection to the SMTP server failed, because the specified SMTP user name is incorrect, or the specified SMTP password is incorrect.Check the SMTP user name and password. Snmp over IPv4 is ready Communication over IPv4 with snmp is available. Snmp over IPv6 is ready. Communication over IPv6 with snmp is available. Snmp over IPv4 over 1394 is ready. Communication over IPv4 over 1394 with snmp is available. Snmp over ipx is ready. Communication over IPX with snmp is available. snmpd start. The snmpd service has started. started. The direct print service has started. Started. The bonjour (rendezvous) function is enabled. terminated. The bonjour (rendezvous) function is disabled. The print server received error during attempt to log in to the network. Access to the network was denied. Verify that the print server name and password are correct. Login to the file server failed.The print server is not registered or a password is specified. Register the print server without specifying a password. too many pictures. PictBridge printing failed because too many image are sent during one print transacation. Reduce images at one print transaction. trap account is unavailable. v3Trap cannot be sent. This could be because the Trap destination account is different from the account specified by the printer. usbd is disable. Plug and Play function and printing is disabled because usbd is disabled in the security mode. Enable usbd in the security mode. WINS name registration: No response to serv- There was no response from the WINS server. er Check the correct WINS server address is en- tered. Alternatively,check the WINS server is functioning properly.