Ricoh Aficio MP 7500 S/P Network Guide - Page 128
Using AutoNet, Mac OS X 10.2.3. or higher.
View all Ricoh Aficio MP 7500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Appendix ❒ If you do not use the WINS server, reserve the printer's IP address in Using AutoNet the DHCP server so the same IP address is assigned every time. If the printer IPv4 address is not auto- ❒ To use the WINS server, change the WINS server setting to "active" using the control panel. ❒ Using the WINS server, you can configure the host name via the re- matically assigned by the DHCP server, a temporary IP address starting with 169.254 and not used on the network can be automatically selected by the printer. mote network printer port. Note ❒ DHCP relay-agent is not supported. If you use DHCP relay-agent on a network via ISDN, it will re- ❒ The IP address assigned by the DHCP server is given priority over that selected by AutoNet. 4 sult in increased line charges. This is because your computer connects ❒ You can confirm the current IPv4 address on the configuration page. to the ISDN line whenever a packet For more information about the is transferred from the printer. configuration page, see General ❒ If there is more than one DHCP Settings Guide. server, use the same setting for all servers. The machine operates us- ❒ When AutoNet is running, the NetBIOS name is not registered on ing data from the DHCP server the WINS server. that responds first. ❒ The machine cannot communicate with devices that do not have the AutoNet function. However, this machine can communicate with Macintosh computers running Mac OS X 10.2.3. or higher. 120