Ricoh Aficio MP 8000 Facsimile Reference - Page 74
Specifying a Destination, Sending Over a Fax Line
View all Ricoh Aficio MP 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Transmission Specifying a Destination This section explains how to specify a destination. 1 Fax numbers, IP-Fax destinations, and e-mail addresses can be specified. Note ❒ The display shows the percentage of free memory space for storing originals. Since fax numbers, IP-Fax destinations and e-mail addresses are programmed in separate memory, dialing fax numbers using the number keys does not change the percentage on the display. Sending Over a Fax Line Enter numbers directly using the number keys on the right side of the control panel. A Make sure that [Fax] is selected. B Enter the fax number using the number keys. If you make a mistake, press the {Clear/Stop} key, and then enter again. If the optional extra G3 interface unit is installed, select the line you want to use before pressing the {Start} key. To select a destination from the Address Book, see "Using the Address Book to Specify Destinations". C Press the {Start} key. The machine starts to scan the original and stores it in memory. When scanning ends, the Communicating indicator lights and transmission starts. Note ❒ You can insert pauses and tones in a fax number. ❒ Press [Prg. Dest.] after entering the fax number to store the fax number in the destination list. ❒ For the maximum number of digits for a destination, see "Maximum Values". 64