Ricoh Aficio MP C3000SPF Network Guide - Page 114
Connected DHCP Server<DHCP serverad, Change IP address from DHCP Server.
View all Ricoh Aficio MP C3000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Monitoring and Configuring the Printer Message Problem and solutions Attach to print queue (In the print server mode) Attached to the print queue. Authentication mode mismatch< SSID > Authentication mode is different to the AP. The required SSID is the SSID of the access point connected to when in infrastructure mode. 2 btd is disabled. Communication via Bluetooth is unavailable because btd is disabled in the security mode. Enable the btd in the security mode. centrod is disabled. Communication via parallel connection is unavailable because centrod is disabled in the security mode. Enable centrod in the security mode. Cannot create service connection (In the remote printer mode) Connection to the file server has not been established. The number of file server users may have exceeded the maximum capacity of the file server. Cannot find rprinter (/) The printer with the number displayed on the print server does not exist. Make sure that the printer number is registered on the print server. Change IP address from DHCP Server. The IP address changes when DHCP lease is renewed. To always assign the same IP address, set a static IP address to the DHCP server. child process exec error! (process name) The network service failed to start. Turn the printer off and then on. If this does not work, contact your service or sales representative. Client password rejected The client's password was rejected. Check the client password. Client tls certificate rejected The client's TLS certificate was rejected. Check the certificate. Connected DHCP Server(). the DHCPserver. Could not attach to FileServer (In the remote printer mode) Connection to the file server has not been established. The file server has refused the connection. Check the file server configuration. Could not attach to PServer (In the remote printer mode) Connection to the print server has not been established. The print server has refused the connection. Check the print server configuration. Current Interface Speed:xxxMbps Speed of the network (10Mbps, 100 Mbps, or 1Gbps). Current IP address Current IPv4 address. Current IPX address Current IPX address 106