Ricoh Aficio MP C3000SPF Network Guide - Page 33
Using NetWare, Setting procedure, Using SmartDeviceMonitor for Admin
View all Ricoh Aficio MP C3000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Using NetWare Using NetWare This section describes the setting pro- ❖ Using SmartDeviceMonitor for Admin cedure for network printers in the NetWare environment. In the Net- To use the machine in a NetWare environment, use SmartDevice- 1 Ware environment, you can connect Monitor for Admin to set the Net- the machine as a "print server" or "re- Ware printing environment. mote printer". Note Important ❒ The NetWare Client provided ❒ IPv6 cannnot be used on this function. by Novell is required to set the ❖ Setting procedure printing environment using SmartDeviceMonitor for Ad- • When using the machine as a min under the following envi- print server ronments: A Installing SmartDeviceMonitor for Admin • NDS mode in Windows 95/ 98/Me B Setting the network interface board. • NDS or Bindery mode in Windows 2000/XP, Windows NT 4.0 C Turning the machine off and then back on. • When using the machine as a remote printer A Installing SmartDeviceMonitor for Admin. B Setting the network interface board. C Setting NetWare. D Starting the print server. Note ❒ This procedure assumes an envi- ronment is already prepared for normal NetWare running the printing service setting. Reference p.43 "Installing SmartDeviceMonitor for Admin" ❖ Printers listed by SmartDeviceMonitor for Admin SmartDeviceMonitor for Admin lists printers connected to the network. If you cannot identify the machine you want to configure, print configuration page, and then check the machine name. ❒ The procedure is explained with the following example settings: • File server's name ...CAREE • Print server's name ...PSERV • Printer's name ...R-PRN • Queue name ...R-QUEUE 25