Ricoh Aficio MP C3000SPF Troubleshooting - Page 103
Returning to the Previous Setting, Start Printing, Previous Setting
View all Ricoh Aficio MP C3000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Maintenance ❒ When performing the auto color calibration from the printer function, select test patterns from [600 × 600 dpi], [1800 × 600 dpi] and [1800 × 600 dpi] and then press [Start Printing]. ❒ The test pattern will be printed on an A4K, 81/2"× 11"K size page (If A4K is not available then A3 L, B4 JISL will be used.). Make sure to check the paper set in the paper tray. ❒ Set the test pattern in the following way: GCCLCPIE ❒ When the ADF is installed, make sure to set the test pattern on the expo- sure glass, and then 2 or 3 white sheets, same size as the test pattern, above the test pattern. 6 Returning to the Previous Setting "Previous Setting" means to return to the previous status before any changes. A Press [Previous Setting]. B Press [Yes]. The settings return to the previous contents. Note ❒ When returning the auto color calibration of the copy function, press [Previous Setting] of the Copier Function. If returning the auto color calibration of the printer function, press [Previous Setting] of the Printer Function. 95