Ricoh Aficio MP C4500 EFI Troubleshooting Guide - Page 92
Changing the Paper Size in the Paper Tray, aligned the paper size you want to load.
View all Ricoh Aficio MP C4500 EFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Adding paper, Toner and Staples Changing the Paper Size in the Paper Tray The following procedure explains how to change a paper size in the paper tray. Important ❒ Do not stack paper over the limit mark. ❒ Check the top of the paper is aligned to the right side. A Check that paper in the paper tray is not being used for copying, and then pull the tray carefully out until it stops. AQD027S 6 B Remove papers if loaded. C Release the lock on the side fences. AMJ015S D While pressing down the release lever, slide the side fences until they are aligned the paper size you want to load. 84 AMJ016S
Adding paper, Toner and Staples
84
6
Changing the Paper Size in the Paper Tray
The following procedure explains how to change a paper size in the paper tray.
Important
❒
Do not stack paper over the limit mark.
❒
Check the top of the paper is aligned to the right side.
A
Check that paper in the paper tray is not being used for copying, and then
pull the tray carefully out until it stops.
B
Remove papers if loaded.
C
Release the lock on the side fences.
D
While pressing down the release lever, slide the side fences until they are
aligned the paper size you want to load.
AQD027S
AMJ015S
AMJ016S