Ricoh Aficio SP 4100NL Operating Instructions - Page 34
Fasten the controller board to the printer with the two screws.
View all Ricoh Aficio SP 4100NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2. Installing Options 10. Fasten the controller board to the printer with the two screws. 2 AUB209S • Use a coin or similar object if the screws do not turn easily. • After finishing the installation, you can check the memory unit is properly installed: Print the configuration page from the [List/Test Print] menu. If it is installed properly, the memory capacity will appear under "Total Memory" on the configuration page. • The table below shows the total SDRAM module capacities. Standard 128 MB*1 128 MB*1 Extended 128 MB 256 MB Total 256 MB 384 MB • *1 Value when the default SDRAM module (64 MB) is removed • If the memory unit is not properly installed, repeat this procedure. If you cannot install it properly even after reinstallation, contact your sales or service representative. • Install the controller board carefully to prevent any malfunction. • "Printing the Test Page", Quick Installation Guide. 32