Ricoh Aficio SP 4100NL Operating Instructions - Page 57
To specify the IP Address, Press the, key to enter the address, and then press
View all Ricoh Aficio SP 4100NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Ethernet Configuration 7. Press the [Escape] key until the screen returns to the [Network Setup] menu. 8. If you use IPv4, assign the IPv4 address to the printer. Press the [ ] or [ ] key to display [IPv4 Settings], and then press the [ Enter] key. To get the IP address for the printer, contact your network administrator. 9. To specify the IP Address, Press the [ ] or [ ] key to display [IPv4 Address], and then press 4 the [ Enter] key. If you use IPv4, also assign subnet mask and gateway address. 10. Press the [ ] or [ ] key to enter the address, and then press the [ Enter] key. Press the [ ] or [ ] key to enter the left most entry field of the address. After entering the left field, press the [ Enter] key, and then you can enter the next field. After completing to enter in the all fields, press the [ Enter] key. Do not set "011.022.033.044" as the IP address. 11. If you use IPv4, use this method of assigning IPv4 address to assign subnet mask and gateway address. Press the [ ] or [ ] key to select [Subnet mask] or [Gateway Address], and then press the [ Enter] key. 12. Press the [Online] key. The initial screen appears. 13. Print a configuration page to confirm the settings made. • "Printing the Test Page", Quick Installation Guide. 55