Ricoh Aficio SP 4110N-KP Quick Setup Guide - Page 6
Troubleshooting Issue, Action
View all Ricoh Aficio SP 4110N-KP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
HotSpot Printer Quick Setup Guide Troubleshooting section No. Issue Action 1 Service is not • Perform the following steps to restart the service: running, i.e., 1. Turn printer power OFF. default printer 2. Disconnect the USB keypad cable (from rear of printer). display 3. Turn printer power ON. message does 4. Waitapprox.90secondsafter[Ready]isdisplayedonprinterLCD. not read: [For 5. Turn printer power OFF. Print 6. Reconnect the USB keypad cable. Release, 7. Turn printer power ON. Press OK] 8. Waitapprox.90secondsafter[Ready]isdisplayedonprinterLCD.The message [Print Release Press OK] should appear on the LCD. 9. To determine service status, go to No. 2. 2 Cannot print • To check service status press the [?] key on the HotSpot keypad. The printer LCD will display one of the following messages: - [PrinterOn x.x LicenseValid]. Indicates that Mobile Printing Service application is working properly. - [PrinterOnx.xInternetDown].Thisindicatesthattheprintercannot getproperconnectiontotheMobilePrintingServiceServer.Pleasecheck printer network settings (IPv4, DHCP, DNS, etc.). Also see No. 3, below. - [PrinterOnx.xNoLicense].Thisindicatesthattheapplicationcannot getavalidlicensefromtheMobilePrintingServiceServer.Pleasecheck printer'snetworksettings(IPv4,DHCP,DNS,etc.).Pleasecheckthatthe printer's time and date are set correctly. See No. 4.