Ricoh C222SF Support Guide - Page 48

Clears the Scanner and Jam Counters.

Get Ricoh C222SF - Aficio SP Color Laser PDF manuals and user guides
UPC - 026649061363
View all Ricoh C222SF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Product Support Guide Revision 1.1 (01/08) Reset Count Clear Count Replace Fuser Scan Maintenance Mono Compression Setting Regist Adjust Size Adjust MODEL: G181 / G183 / G184 48 Horiz.Dup.Back Vert.Dup.Back Adjusts the horizontal registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 4 mm/step] Adjusts the vertical registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 0.3 mm/step] Resets counters to factory defaults. Clears the Scanner and Jam Counters. Resets the maintenance counter for the fusing unit.. This item appears only when the fusing unit life is almost expired Sets the monochrome compression type for scanning. MH (Default)/ MR/ MMR ADF Main Reg. ADF Sub Reg. Flatbed Main Reg. Flatbed Sub Reg. ADF Main Reg. ADF Sub Reg. Flatbed Main Reg. Flatbed Sub Reg. Adjusts the ADF Scan main-scan registration. (G181 doesn't support this.) [-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step] Adjusts the ADF Scan sub-scan registration. (G181 doesn't support this.) [-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step] Adjusts the Flatbed Scan main-scan registration. (G181 doesn't support this.) [-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step] Adjusts the Flatbed Scan sub-scan registration. (G181 doesn't support this.) [-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step] Adjusts the ADF Scan main-scan magnification. (G181 doesn't support this.) [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step] Adjusts the ADF Scan sub-scan magnification. (G181 doesn't support this.) [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step] Adjusts the Flatbed Scan main-scan magnification. (G181 doesn't support this.) [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step] Adjusts the Flatbed Scan sub-scan magnification. (G181 mdoesn't support this.) [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Product Support Guide
MODEL:
G181 / G183 / G184
Revision 1.1 (01/08)
48
Horiz.Dup.Back
Adjusts the horizontal registration for the
back side in duplex mode. If the machine
settings are reset to the factory defaults, this
value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Vert.Dup.Back
Adjusts the vertical registration for the back
side in duplex mode. If the machine settings
are reset to the factory defaults, this value
does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
Reset Count
Resets counters to factory defaults.
Clear Count
Clears the Scanner and Jam Counters.
Replace Fuser
Resets the maintenance counter for the
fusing unit..
This item appears only when the fusing unit
life is almost expired
Scan Maintenance
Mono Compression
Setting
Sets the monochrome compression type for scanning.
MH (Default)/ MR/ MMR
ADF Main Reg.
Adjusts the ADF Scan main-scan
registration. (G181 doesn't support this.)
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
ADF Sub Reg.
Adjusts the ADF Scan sub-scan registration.
(G181 doesn't support this.)
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
Flatbed Main Reg.
Adjusts the Flatbed Scan main-scan
registration. (G181 doesn't support this.)
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
Regist Adjust
Flatbed Sub Reg.
Adjusts the Flatbed Scan sub-scan
registration. (G181 doesn't support this.)
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
ADF Main Reg.
Adjusts the ADF Scan main-scan
magnification. (G181 doesn't support this.)
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
ADF Sub Reg.
Adjusts the ADF Scan sub-scan
magnification. (G181 doesn't support this.)
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Flatbed Main Reg.
Adjusts the Flatbed Scan main-scan
magnification. (G181 doesn't support this.)
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Size Adjust
Flatbed Sub Reg.
Adjusts the Flatbed Scan sub-scan
magnification. (G181 mdoesn't support this.)
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]