Ricoh C222SF Support Guide - Page 52
XXIV., Firmware Update
![]() |
UPC - 026649061363
View all Ricoh C222SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Product Support Guide MODEL: G181 / G183 / G184 52 Revision 1.1 (01/08) Reseller Default Not Execute Execute Does not reset anything. Returns to the upper level. Resets all the settings to the factory defaults except the following. • Counter for Machine Life After executing, the initial setup menu starts after the next poweron. • The "Reseller Default" menu can be entered directly at power-on. If you want to enter this mode directly, Turn on the machine while pressing the "Copy" key. Fax Service Test Menu Entering the Fax Service Test Menu Turn on the machine while pressing the "Fax" key. Going into the Next Level/ Returning to the Previous Level • To go into the next level of an item, select an item then press the "OK" key. • To return to the previous level of an item, press the "Return" key. Exiting the Maintenance Mode Menu To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the "Ready" display appears. Refer to Service manual for more details. XXIV. Firmware Update Do not turn off the main power of the machine during the firmware updating. If doing so, the engine board or controller board may be damaged. Checking the Machine Firmware Version 1. Turn the machine on. 2. If the printer driver is not installed on your PC, install the printer driver now. 3. Press "Menu" and select "Report Print" with the "Up" or "Down" key. 4. Press "OK" and select "Maintenance Page" with the "Up" or "Down" key. 5. Press "OK" to display the "Firmware version (Controller)" and "Engine FW version" Updating the Controller Firmware 1. Make a folder in your computer. 2. Save the files (".dwn", "/ini" and ".exe") in the folder. 3. Click the exe file to execute the updating program. 1. Click "Burn" to send the controller firmware from the PC to the machine. 6. The machine makes a beep sound when starting the firmware update. 6. An image is displayed on the PC and "Firmware update" and "Updating" are displayed on the operation panel. 7. Then, you can close this window at your PC. • Do not turn off the machine until "Done Please reboot" is displayed in the operation panel. Otherwise, the controller board will be damaged.
![](/manual_guide/products/ricoh-c221sf-support-guide-37b560c/52.png)