Ricoh FX200 User's Guide - Page 252
Enter, Upper Level, Clear/Stop, Dynamic Addressing BOOTP/DHCP, server, take the following steps
View all Ricoh FX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
An IP address consists of 4 bytes. A Enter a number between 0 and 255 for each byte. 7 Press the scroll button ( or ) to enter a number between 0 and 255 and press Enter or Upper Level to move between bytes. Enter a number using the number keypad and use the scroll button ( or ) to move between bytes. 8 Repeat step 7 to complete the address from the 1st byte to the 4th byte. 9 Press Enter. 10 To select other parameters, such as a Subnet Mask or a Gateway, press the scroll button ( or ) until the desired item displays on the bottom line. Press Enter. 11 Repeat steps 7 through 9 to configure the other TCP/IP parameters. 12 Press Clear/Stop to return to Standby mode. Dynamic Addressing (BOOTP/DHCP) To have the TCP/IP address assigned automatically by the server, take the following steps: 1 Press Menu until you see "Network Setup" on the top line of the display. 2 Press the scroll button ( or ) until "Config Network" appears on the bottom line. 3 Press Enter. The first available menu item, "TCP/IP," appears on the bottom line. 4 Press the scroll button ( or ) to display "DHCP" on the bottom line and press Enter. 5 To assign the address from the BOOTP server, press Enter when "BOOTP" displays on the bottom line. USING YOUR MACHINE ON A NETWORK A.7