Ricoh FX200 User's Guide - Page 72
To Use Set IP, CARD TEST To Print the NETWORK PRINTER CARD TEST
![]() |
View all Ricoh FX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
6 When the installation is completed, click Finish. To Use Set IP 1 From the Start menu, select Type 103 in Programs, and click Set IP. 2 2 Click to find printer on the local network, or click and type the printer's MAC address. NOTE: To configure the MAC address, see the NETWORK PRINTER CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST PAGE, refer to "Printing a Network Configuration Page" on page A.5. 3 Type IP address, Subnet Mask and Default Gateway, and then click [Config]. 4 If it is successfully is completed, the printer prints NETWORK PRINTER CARD TEST PAGE. GETTING STARTED 2.47
![](/manual_guide/products/ricoh-ac205-users-guide-e9e8c22/72.png)
2
G
ETTING
S
TARTED
2.47
6
When the installation is completed, click
Finish
.
To Use Set IP
1
From the
Start
menu, select
Type 103
in Programs, and
click
Set IP
.
2
Click
to find printer on the local network, or click
and type the printer’s MAC address.
N
OTE
: To configure the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST
PAGE, refer to “Printing a Network Configuration Page” on
page A.5.
3
Type IP address, Subnet Mask and Default Gateway, and
then click
[Config]
.
4
If it is successfully is completed, the printer prints
NETWORK PRINTER CARD TEST PAGE.