Ricoh MP2000SPF Troubleshooting Guide - Page 28
When a Message Is Displayed
UPC - 708562020183
View all Ricoh MP2000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Troubleshooting When Using the Facsimile Function When a Message Is Displayed This section describes the machine's main messages. If other messages appear, follow their instructions. Message Cause Solution Error occurred, A document jam occurred during Press [Exit], and then resend the and trans. was Immediate Transmission. There pages that have not been sent. cancelled. 3 may be a problem with the ma- If the error reoccurs frequently, chine or the telephone line (for ex- contact your service representative. ample, noise or cross talk). Put original Original jammed during Memory Place originals that have not been back, check it Transmission. scanned on the exposure glass, and press Start ADF or ARDF again. key. Cannot detect The machine failed to detect the original size. size of the original. Place original again, then press Start key. LFunc. Problems There is a problem with the fax. Data will be initialized. Memory is full. Scanning will be stopped and only scanned page(s) will be stored. The memory is full. Place original again, and then press the {Start} key. Record the code number shown in the display and contact your service representative. Other functions can be used. If you press [Exit], the machine returns to standby mode and starts transmitting the pages that have been stored. Cannot send fax as scanner is in use by another function. The machine is scanning an origi- Before sending the fax, cancel the nal under another function. current scan job under the other function. To do this, press the {Clear/Stop} key on the control panel to display the message "Clear/Stop key was pressed. Stop scan- ning?", and then press [Stop]. Updating the settings... Reselect dest./functions after update finishes. The destination list is being updated from the network using SmartDeviceMonitor for Admin or Web Image Monitor. Wait until the message disappears. Do not switch off the power while this message is displayed. 22