Ricoh MP2000SPF Troubleshooting Guide - Page 46
Parallel I/F Er, Printer Font Er
UPC - 708562020183
View all Ricoh MP2000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Troubleshooting When Using the Printer Function Message Cause Solution Paper Tray is in The specified paper tray is in use Wait until the other function has use. by another function, such as the finished using the specified paper copier function. tray. Tray # Error An error has occurred with the paper tray. # indicates the tray number. Press [JobReset] to change the paper tray settings, or press [FormFeed] to select another paper tray and print using that. USB Error An error has occurred in the USB interface. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. Duplex mode is The selected paper tray has not been Press [JobReset] to change the pa- 4 in off position configured for duplex printing. for Tray # # indicates the tray number. per tray settings or do single-sided printing. For details about the tray settings, see General Settings Guide. Ethernet Board An error has occurred in the Error Ethernet board. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. NV-RAM Error An error has occurred in the machine. Turn off the main power switch, and back on again. If the message appears again, call your sales or service representative. Authentication failed. • The login user name or pass- • Check your login user name word entered is incorrect. and password. • The machine currently cannot • Contact the administrator. perform authentication. Parallel I/F Er- An error has occurred in the par- Contact your service representative. ror allel interface board. Printer Font Er- An error has occurred in the font ror. settings. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. Memory Overflow Maximum capacity of PCL or PostScript3 list display has been exceeded. Reduce the value of [Resolution] in the printer driver, or select [Font Priority] in [Memory Usage] under [System] (see "Printer Features", General Settings Guide). If this message continues to appear after taking these steps, decrease the number of files sent to the machine. 40