Ricoh P 311 Setup Guide - Page 11
Easy Setup Using the WPS Button, Easy Setup Using a PIN Code
View all Ricoh P 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Easy Setup Using the WPS Button ● Make sure the Ethernet cable is not connected to the machine. ● In Steps 11 to 13, configure each setting within two minutes. The following item is necessary to set up a Wireless (Wi-Fi) connection. ● Router (access point) 1. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. Other Setup 22 Network Setup Quit Setup M0ESIC0011 2. Press the [OK] key. 3. Check that the router (access point) is working correctly. 4. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi) connection is enabled. For details, see page 5 "Attaching the wireless LAN option". 5. Press the [Menu] key. DYG052 6. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key. Menu 68 Network Wizard Network Settings Print List/Report M0ESIC0023 7. Enter the administrator password. 8. Press the [ ] or [ ] key to select [Wireless(Wi-Fi)], and then press the [OK] key. Network Settings 1 5 Wired (Ethernet) Wireless (Wi-Fi) IPv4 Configuration ECB207 9. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key. Wireless (Wi-Fi) 69 Current Connection Input SSID WPS ECB215 10. Press the [ ] or [ [OK] key. WPS Type PBC PIN ] key to select [PBC], and then press the 12 DSG092 11. Press the [ ] or [ ] key to select [Yes], and then press the [OK] key. PBC WPS PBC Connect ? Yes No ECB216 "Please push the [AP] within 2 minutes" appears, and the machine starts to connect in PBC method. 12. Press the WPS button on the router (access point) within two minutes. WPS CHV607 • For details about how to use the WPS button, refer to the manuals for the router (access point). 13. Check the result. Connection has succeeded: PBC Connection to AP has Succeeded EXIT ECB227 • Press the [OK] key to return to the screen displayed in Step 10, and then press the [Menu] key to return to the initial screen. Connection has failed: PBC Connection to AP has Failed EXIT ECB228 • Press the [OK] key to return to the screen displayed in Step 10. Check the configuration for the router (access point), and then try the connection again. 14. Configuring the Wireless (Wi-Fi) settings is complete. To use the printer driver, install the printer driver according to the procedure on page 12 "3. Installing the Printer Driver". Easy Setup Using a PIN Code ● Make sure the Ethernet cable is not connected to the machine. ● In Steps 13 to 15, configure each setting within two minutes. ● To establish a connection using the PIN code, use a computer that is connected to the router (access point). ● The following item is necessary to set up a Wireless (Wi-Fi) connection. ● Router (access point) 1. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. Other Setup 22 Network Setup Quit Setup M0ESIC0011 9