Ricoh PJ WXL5670 Users Manual - Page 85
Troubleshooting
View all Ricoh PJ WXL5670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center. Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the "Connecting the Projector" section. Ensure the pins of terminals are not crooked or broken. Make sure the projector is switched on. Ensure that the "AV Mute" feature is not turned on. Problem: Partial, scrolling or incorrectly displayed image Press "Auto" on the remote control. Adjust the computer display settings. Verify the resolution setting is less than or equal to 1600 x 1200 resolution. See your operating system's Help file. If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings. For example: [Fn]+[F3] PANASONIC, NEC => Fn+F3 HP, SHARP, TOSHIBA => Fn+F5 IBM, SONY => Fn+F7 DELL, EPSON => Fn+F8 FUJITSU => Fn+F10 APPLE =>F7 If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. 83 English English