Ridgid R861150N Operation Manual - Page 7
Features - 18 volt hammer drill
View all Ridgid R861150N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
FEATURES PRODUCT SPECIFICATIONS Chuck 1/2 in. Keyless Motor 18 Volt DC Switch Variable Speed (VSR) No Load Speed 0-450/0-1,600 r/min. (RPM) KNOW YOUR HAMMER DRILL See Figure 1, page 14. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. Auxiliary Handle ASSEMBLY Your drill is equipped with an auxiliary handle assembly. For ease of operation, use the handle with either the left or right hand. BIT STORAGE Bits provided with the drill can be placed in the storage area, located on the base of the drill. blows per minute This tool features an impact speed of 0-7,200 BPM (Blows Per Minute) in LO speed and 0-25,600 BPM in HI speed. Blows Per Minute is the number of impacts per minute. DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK) Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use. Blows per minute 0-7,200/0-25,600 BPM Clutch 24 Position Torque 565 in.lb. MODE SELECTOR With the mode selector, you can select drill, drive, or hammer mode. KEYLESS CHUCK The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws. LED LIGHT The LED light, located on the front of the tool base, illuminates when the switch trigger is depressed. This provides extra light for increased visibility. TORQUE ADJUSTMENT RING Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application. TWO-SPEED GEAR TRAIN The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill for selecting either LO (1) or HI (2) speed. VARIABLE SPEED The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. 7 - English