Ridgid R861150N Operation Manual - Page 8

ASSEMBLY UNPACKING This product has been shipped completely assembled.  Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the product carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.  If any parts are damaged or missing, please call 1-866-539-1710 for assistance. PACKING LIST Hammer Drill Auxiliary Handle Assembly Double-ended Bit Tool Bag Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts. INSTALLING/REMOVING THE AUXILIARY HANDLE See Figure 2, page 14. The drill is equipped with an auxiliary handle assembly that can be mounted on either side. To install the auxiliary handle: n Insert the hex bolt through the hole on the drill. n Thread the auxiliary handle onto the end of the bolt and tighten the handle by turning it clockwise. Make sure the handle is secure before beginning operation. To remove the handle and install it on the opposite side: n Turn the handle counterclockwise to loosen and remove the handle and hex bolt. n Insert the hex bolt through the hole on the drill. Thread the auxiliary handle onto the end of the bolt and tighten the handle by turning it clockwise. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. OPERATION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless ­fraction of a second is sufficient to inflict severe injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. APPLICATIONS You may use this product for the purposes listed below:  Hammer drilling in concrete, brick, or other masonry  Drilling in wood  Drilling in ceramics, plastics, fiberglass, and laminates  Drilling in metals  Driving screws  Mixing paint 8 - English