Ridgid RV2600B Owners Manual - Page 9

Drum/Caddy Assembly

Get Ridgid RV2600B PDF manuals and user guides View all Ridgid RV2600B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

SP6636 1/10/07 9:52 AM Page 9 Drum/Caddy Assembly If any parts are missing or damaged contact Customer Service. Do not assemble until you have all the parts. 1. Remove left and right caddies from drum. 2. Install cap nut on one side of shaft rod. Tap gently with rubber mallet or hammer until fully seated. Slide open end of shaft through the wheel (smooth side of wheel facing outward). 3. Place wheel/shaft assembly through caddy left and on through the caddy right, as shown. 4. Then place the remaining wheel onto the caddy assembly (smooth side of wheel facing outward), and install second cap nut. 5. Invert drum to install caddy. Place the caddy assembly onto the drum, as shown. Be sure that wheels spin freely, and do not contact the caddies. 6. Once the caddies are aligned on the drum, gently tap each end of each caddy until firmly seated. It is recommended to tap the center portion of the front caddies, as shown. 7. Using a rubber mallet or hammer, gently tap the wheel caps onto each wheel until the wheel caps are firmly seated onto each wheel. This is required on both sides. NOTE: Smooth side of the wheel to the outside. Cap Nut Shaft Rod Caddy Right CADDY ASSEMBLY Caddy Left Wheel Cap Nut 1/16" Clearance Caddy Wheel TAP TAP Wheel Cap Mallet 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
9
If any parts are missing or damaged
contact Customer Service.
Do not assemble until you have all the
parts.
1. Remove left and right caddies from
drum.
2. Install cap nut on one side of shaft rod.
Tap gently with rubber mallet or hammer
until fully seated. Slide open end of shaft
through the wheel (smooth side of
wheel facing outward).
3. Place wheel/shaft assembly through
caddy left and on through the caddy
right, as shown.
4. Then place the remaining wheel onto
the caddy assembly (smooth side of
wheel facing outward), and install
second cap nut.
5.Invert drum to install caddy. Place the
caddy assembly onto the drum, as
shown. Be sure that wheels spin freely,
and do not contact the caddies.
6. Once the caddies are aligned on the
drum, gently tap each end of each
caddy
until
firmly
seated.
It
is
recommended to tap the center portion
of the front caddies, as shown.
7. Using a rubber mallet or hammer, gently
tap the wheel caps onto each wheel
until the wheel caps are firmly seated
onto each wheel. This is required on
both sides.
Drum/Caddy Assembly
NOTE: Smooth side of
the wheel to the outside.
CADDY
ASSEMBLY
Cap
Nut
Shaft
Rod
Caddy Left
Wheel
Cap
Nut
Caddy
Right
Wheel Cap
Mallet
Caddy
Wheel
1/16" Clearance
TAP
TAP
SP6636
1/10/07
9:52 AM
Page 9