Rocketfish RF-ACU9025 User Manual (English) - Page 6

complementary tip. If you are unable to locate your laptop

Get Rocketfish RF-ACU9025 PDF manuals and user guides View all Rocketfish RF-ACU9025 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

This AC power adapter is not compatible with Mac computers or laptops requiring more than 90 watts of power. NOTE: If the compatible tip for your laptop is not included in the adapter package, one free tip can be ordered through the Tip Wizard at www.rocketfishproducts.com. Use the Tip Wizard to locate the manufacturer and model and you can order your complementary tip. If you are unable to locate your laptop on the Tip Wizard or need assistance please contact Rocketfish customer service at (800) 620-2790. 3 Locate the specified tip from the tip bundle provided. Each tip is clearly numbered. 4 Connect the selected tip to the end of the output cable, making sure that the pins on the tip are aligned with the holes in the cable. The ridge on the inside of the tip should align with the groove in the output cable connector. Make sure that the tip is pushed all the way into the output cable's connector. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
6
This AC power adapter is not compatible with Mac computers
or laptops requiring more than 90 watts of power.
NOTE
: If the compatible tip for your laptop is not included in
the adapter package, one free tip can be ordered through the
Tip Wizard at www.rocketfishproducts.com. Use the Tip Wizard
to locate the manufacturer and model and you can order your
complementary tip. If you are unable to locate your laptop on
the Tip Wizard or need assistance please contact Rocketfish
customer service at (800) 620-2790.
3
Locate the specified tip from the tip bundle provided. Each
tip is clearly numbered.
4
Connect the selected tip to the end of the output cable,
making sure that the pins on the tip are aligned with the
holes in the cable. The ridge on the inside of the tip should
align with the groove in the output cable connector. Make
sure that the tip is pushed all the way into the output
cable's connector.