Rocketfish RF-G1603 Quick Setup Guide - Page 1

PACKAGE CONTENTS • HDMI splitter • AC power adapter • Quick Setup Guide You will need: • High-speed HDMI cables, such as Rocketfish, available in multiple lengths. Note: Using this product with 4K video will require the use of 18 Gbps bandwidth cables for best performance. FEATURES • Supports 3D video • Supports up to 4K UHD • Supports 18 Gbps bandwidth • Compatible with most TVs, projectors, and video displays with HDMI inputs • Gold-plated connectors for maximum signal transfer and corrosion resistance • Supports HDMI CEC commands for remote control functionality • Wall-mountable with integrated key-hole slots (hardware not included). HDMI SPLITTER BASICS, This Rocketfish two-way HDMI splitter will send HDMI audio and video signals from a single source, such as a Blu-ray/DVD player or cable/satellite box, to two destinations, such as a TV and an AV receiver. It is ideal for sending the audio signal from a 4K source to an AV receiver (one that does not support 4K video pass-through), and video signal to a 4K UHD TV. Front Back Power LED HDMI OUT 1 HDMI IN HDMI Micro USB OUT 2 5V/1A OUTPUT1 INPUT OUTPUT2 Before using your new product, please read these instructions to prevent any damage. SETTING UP YOUR HDMI SPLITTER 1 Connect a high-speed HDMI cable (not included) from your video source to the INPUT port on the HDMI splitter. 2 Connect another high-speed HDMI cable from your HDMI splitter's OUTPUT1 or OUTPUT2 port to the IN port of an audio or display device. HDMI OUTPUT1 INPUT OUTPUT2 Video sources Cable/Satellite box Game OR console OR Streaming sticks/boxes Blu-ray player OR OR Connect one HDMI cable to an audio device and another HDMI cable to a display device. HDMI OR HDMI Audio devices OR AV receiver Soundbar Display devices HD TV OR Monitor OR Projector 3 Connect the included AC power adapter from the micro USB port on the HDMI splitter to a standard 120V AC power outlet. The Power LED indicator on the front lights white. Micro USB OUTPUT1 INPUT OUTPUT2 AC power adapter Power outlet 4 Turn on all connected devices and operate. When you are finished, you can leave your HDMI splitter plugged in. QUICK SETUP GUIDE RF-G1603 / RF-G1603-C, 4K HDMI Splitter SPECIFICATIONS HDMI version Video signal bandwidth Resolutions supported HDMI HDCP Power Dimensions 2.0b 18 Gbps 480i to 2160p (4K UHD) / 60Hz from source device Compliant with HDCP 2.2 5 VDC / 1,000 mA (5 W max) Micro USB 3.9 × 3.4 × 1.1 in. (100 × 87 × 27 mm) TROUBLESHOOTING Problem Possible solution Power LED is not on Make sure that the HDMI splitter's power adapter is plugged in. Video has interference • Make sure that you are using high-speed HDMI cables for all connections. • Make sure that the TV's video resolution supports the video source's output resolution. No video and/or audio • Make sure that the audio and video formats of the content being used (such as Blu-ray disc) are supported by all connected devices. • Make sure that your destination components (such as TV and AV receiver) are set to the correct HDMI inputs. • Make sure that you are using High-Speed HDMI cables for all connections. • Very long length of cables (over 20 ft./6.1 m) may cause a loss of video signal or downgrade to lower resolution. Use a shorter cable, if possible. • Unplug the HDMI splitter's AC power adapter, then plug it back in again.