Rocketfish RF-QS2 Quick Setup Guide (English)

Indicator

Volume down

Power/Send/End

button

Microphone

Volume up

Visor clip

Charger

connector

QUICK SETUP GUIDE

QS2-T Car Speakerphone

RF-QS2-T

Congratulations on your purchase of the RF-QS2-T

Bluetooth Speakerphone. This speakerphone enables

comfortable, hands-free communication with a

Bluetooth-compatible phone.

Package contents

• RF-QS2-T speakerphone

• Car charger adapter

• USB charging cable

•

Quick Setup Guide

Features

Charging the battery

Before using your speakerphone, you must charge it

for about two hours. When the battery is fully charged,

it provides up to 11 hours of talk time and up to

480 hours of standby time.

1

USB charging: use the USB cable to plug your QS2-T

speakerphone into a computer or other USB power

port.

2

Car charging: use the car charger adapter and USB

charging cable to charge your QS2-T speakerphone

in your car.

Turning the speakerphone on

Press and hold the

Power/Send/End

for about

two seconds. RF-QS2-T beeps and the yellow-green

indicator light starts blinking. (First time use requires

pressing it for 4 seconds.)

Turning the speakerphone off

Press and hold the

Power/Send/End

for about

four seconds, RF-QS2-T beeps and the red indicator light

is displayed briefly.

Pairing the speakerphone

1

Make sure that the compatible phone is turned on

and within 33 ft. (10 m) of the speakerphone.

2

Turn on the QS2-T and make sure it’s fully charged.

Press and hold the

Power/Send/End

button for

about four seconds. The yellow-green indicator

flashes rapidly. Release the button. The

speakerphone is now in pairing mode.

3

Activate the Bluetooth connection from the phone.

See your phone’s documentation for more

information.

4

Set the phone to start searching for Bluetooth

devices.

5

Select

RF-QS2

from the list.

6

Enter the PIN

0000

to connect (or “pair”) the

speakerphone to the phone. The speakerphone

beeps once, and the indicator blinks yellow-green to

indicate the Bluetooth connection is active.

To...

Do this...

Make a call

Press

Power/Send/End

.

Redial

Double-press

Power/Send/End

.

Answer a call

Press

Power/Send/End

.

End a call

Press

Power/Send/End

.

Refuse a call

Double-press

Power/Send/End

.

Change the speaker

Press the volume up button (+) to increase

volume

volume or press the volume down (-) button to

decrease.

Mute or unmute a call

Press and hold the Volume down (-) button until

a tone is heard.

Switch a call between

Press and hold

Power/Send/End

for

the phone and the

two seconds.

speakerphone

Voice dialing

When no call is in progress, quickly press and release

Power/Send/End

. When you hear a tone, speak the

number or voice tag for the number you want to call.

(The phone must have a voice dial feature and have

recorded voice tags.)

Making a call

Turning the indicator on or off

•

Press the power and volume up buttons at the same

time for about four seconds. The indicator turns on.

Press the power and volume down buttons at the

same time for about four seconds. The indicator

turns off. You can enable or disable the indicator

when the speakerphone is connected with your

phone.

Disconnecting the speakerphone from the phone

To disconnect the speakerphone from the phone, do

one of the following:

•

Turn off the speakerphone.

•

Disconnect the RF-QS2-T in the phone’s menu.

•

Move the speakerphone more than 33 ft. (10 m)

away from the phone.

Note

: You do not need to delete the pairing to

disconnect the speakerphone. When you reconnect a

paired speakerphone, you will not be asked for its PIN

again.

If you want to pair your speakerphone with new phones,

you don’t need to erase all paired device information.

There can be up to eight different paired devices

information stored.

To erase paired devices from your speakerphone:

•

When the speakerphone turned off, press and hold

the

Power/Send/End

and volume up (+) buttons

simultaneously for more than six seconds. A tone

plays, and the indicator flashes red and yellow-green.

The speakerphone then enters the pairing state

automatically.

Rocketfish RF-QS2 Quick Setup Guide (English)

Rocketfish RF-QS2 Manual

Rocketfish RF-QS2 manual content summary: