Rocketfish RF-TVMLPT03V3 User Guide - Page 5

TV WALL MOUNT RF-TVMLPT03V3 Installation instructions STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions. 3 Temporarily lay the TV brackets (B and C) on the back of your TV in a vertical orientation. 4 Align the screw holes in the TV brackets with the mounting screw holes on your TV. 5 Identify which type of back your TV may have: • Flat back: The brackets lay flush against the back of your TV and does not block any jacks. You do not need spacers when assembling the wall mount. • Obstructed back: The brackets block any of the jacks on the back of your TV. You will need spacers (I or J) when assembling the wall mount. • Irregularly-shaped back: There is a gap between the brackets and some part of the back of your TV. You will need spacers (I or J) when assembling the wall mount. 6 Remove the TV brackets (B and C). Need help? Call 1-800-620-2790 (U.S. and Canada) 5