Rocketfish RF-WHD210 User Manual (English) - Page 5
Setting up the WirelessHD Kit - model
![]() |
View all Rocketfish RF-WHD210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Remote control Note: Remote control design subject to change. Item Description 1 SLEEP button -Press to put the WirelessHD receiver and transmitter into sleep mode; or to "wake" them up from sleep mode if they do not automatically do so on their own (this functionality varies by brand and model of connected components). Be sure to point the remote toward the transmitter. Once the transmitter wakes up, the receiver automatically wakes up as well. 2-5 HDMI 1-4 - Press to select the HDMI port for the signal source of your choice. Note: Remove the plastic film from the remote control before using it for the first time. Make sure you point the remote control at the WirelessHD transmitter. Plastic film Setting up the WirelessHD Kit Setup tips: - The transmitter and receiver are pre-paired at the factory. - Test the placement of the transmitter and receiver for a good signal prior to permanently mounting or installing everything. - For best performance and range, use the included receiver mounting bracket to mount the receiver vertically on the wall next to the TV (NOT behind the TV) or upside-down on the ceiling next to the projector, ensuring that the Rocketfish and WiHD logos can be seen from the position in the room where the transmitter will be located. - Use only good quality high-speed HDMI cables for all connections, such as Rocketfish brand cables. Poorly constructed HDMI cables can negatively impact performance and may not support all of the features included with your connected source devices. - Do not place the transmitter or receiver inside a cabinet or other location where they will not have a clear view of the room. Refer to the following setup diagrams to arrange your transmitter and receiver. For best performance the transmitter and receiver should face each other, with the receiver mounted vertically to the wall next to the TV (not behind the TV) or upside-down on the ceiling next to the project, ensuring that the Rocketfish and WiHD logos can be seen from the position in the room where the transmitter will be located. Side view Transmitter 32.8 ft. (10 m) 16.4 ft. (5 m) 47° Receiver 47° 16.4 ft. (5 m) Floor Top view Transmitter 32.8 ft. (10 m) 82° 82° 16.4 ft. (5 m) Receiver 16.4 ft. (5 m) Note: The transmitter and receiver must be located within the same room. The wireless signal will not pass through walls, floors, or ceilings. RF-WHD210 5
![](/manual_guide/products/rocketfish-rfwhd210-user-manual-english-a8e5eee/5.png)