Ryobi BD4601 Operation Manual

Ryobi BD4601 Manual

Get Ryobi BD4601 PDF manuals and user guides View all Ryobi BD4601 manuals
Add to My Manuals
Save this manual to your list of manuals

Ryobi BD4601 manual content summary:

  • Ryobi BD4601 | Operation Manual - Page 1
    OPERATOR'S MANUAL BELT/DISC SANDER MANUEL D'UTILISATION PONCEUSE À BANDE/DISQUE MANUAL DEL OPERADOR LIJADORA DE BANDA Y DISCO BD4601 4 x 36 45 30 15 15 30 60 45 0 15 30 45 60 Your belt/disc sander has been engineered and manufactured to our high standard for dependability, ease of operation
  • Ryobi BD4601 | Operation Manual - Page 2
    date of purchase, you may either request service under this warranty or you may exchange any Ryobi® power tool which does not work properly sale). We will repair any faulty workmanship, and either repair or replace any defective part, at our option. We will do so without any charge to you. We will
  • Ryobi BD4601 | Operation Manual - Page 3
    Follow instructions for lubricating and changing accessories.  DISCONNECT TOOLS. When not in use, before servicing, manual for recommended accessories. The use of improper accessories may result in injury.  NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped.  CHECK DAMAGED PARTS
  • Ryobi BD4601 | Operation Manual - Page 4
    .  WHEN SERVICING use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.  USE ONLY RECOMMENDED ACCESSORIES listed in this manual or addendums. Use of accessories that are not listed may cause the risk of personal injury. Instructions for safe use
  • Ryobi BD4601 | Operation Manual - Page 5
    . SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Always wear safety goggles or safety glasses with
  • Ryobi BD4601 | Operation Manual - Page 6
    check the power supply. SPEED AND WIRING The belt speed of this tool is approximately 1,900 SFM that can support one power tool may not be able to support two or three tools. GROUNDING INSTRUCTIONS See Figure qualified electrician or service personnel if the grounding instructions are not completely
  • Ryobi BD4601 | Operation Manual - Page 7
    is located on the side of the belt/disc sander. SWITCH AND SWITCH KEY Your belt/disc sander has an easy access power switch. TRACKING KNOB A tracking knob aids in centering the sanding belt. WORK SUPPORT (BACKSTOP) Supports the workpiece on the sanding belt. WORK TABLE Equipped with a sturdy work
  • Ryobi BD4601 | Operation Manual - Page 8
    Work support 1 H Hex key 1 I Washers 2 J Washer 1 K Table lock knob 1 Operator's Manual (not shown 1 UNPACKING This product requires assembly.  Carefully lift sander from carton and place on a level work surface. WARNING: Do not use this product if any parts on the Loose Parts List are
  • Ryobi BD4601 | Operation Manual - Page 9
    MOUNTING THE WORK TABLE FOR USE WITH THE BELT SANDER See Figure 7, page 16. n Insert the work table index pin into the hole in the sanding belt arm. n Position a washer over the table lock knob then tighten the table lock knob securely. ASSEMBLING WORK SUPPORT See Figure 8, page 16. n Place the work
  • Ryobi BD4601 | Operation Manual - Page 10
    left side toward the center. HORIZONTAL AND VERTICAL SANDING See Figure 16, page 18. The belt/disc sander can sand both vertically and horizontally. Depending on the workpiece, use the work support for horizontal sanding operations and use the work table for vertical sanding operations. n Using the
  • Ryobi BD4601 | Operation Manual - Page 11
    20, page 19. n Plug in belt/disc sander. To check belt tracking: n Turn the switch ON and then immediately turn it OFF. If the belt tends to slide off the idler drum or drive drum, the belt is not tracking properly. To adjust belt tracking: n If the sanding belt moves toward the disc, turn the
  • Ryobi BD4601 | Operation Manual - Page 12
    MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product . CHANGING DRIVE BELT See Figure 22, page 19. n Unplug the belt/disc sander. n Using a phillips head screwdriver, remove the screw in the center of the belt cover.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
4
x 36
45
30
15
60
45
15
30
0
15
30
45
60
OPERATOR’S MANUAL
BELT/DISC SANDER
MANUEL D’UTILISATION
PONCEUSE À BANDE/DISQUE
MANUAL DEL OPERADOR
LIJADORA DE BANDA Y DISCO
BD4601
Cette ponceuse à bande/disque a été conçue et fabriquée conformé-
ment à nos strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenue, elle vous donnera des
années de fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
Su
lijadora de banda y disco
ha sido diseñado y fabricado de con-
formidad con nuestras estrictas normas para brindar fiabilidad,
facilidad de uso y seguridad para el operador. Con el debido cui-
dado, le brindará muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA:
Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your belt/disc sander has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for purchase.