Ryobi BD4601 Operation Manual - Page 7
Features - belt sander
View all Ryobi BD4601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
FEATURES PRODUCT SPECIFICATIONS Belt Size 4 in. x 36 in. Belt Speed 1,900 SFM Belt Tilt 0°- 90° Disc Size 6 in. Disc Speed 3,600 r/min. (RPM) Table Size 8-7/8 in. x 6-1/4 in. Table Tilt 0°- 45° Input 120 V, AC only, 60 Hz, 4.3 Amps Motor 1/2 HP KNOW YOUR BELT/DISC SANDER See Figure 2, page 14. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BELT TENSION LEVER The belt tension lever releases the belt tension for easy belt replacement. BEVEL SCALE The worktable comes equipped with a bevel scale that indicates the degrees the worktable can be tilted up to 45°. MITER GAUGE The miter gauge aligns the wood for positive stops at 90° and 45°. POSITIONING BOLT Loosen the positioning bolt to change sanding belt positions from horizontal to vertical. SANDING BELT The sanding belt can be adjusted from horizontal to vertical providing different positions for sanding workpieces of different shapes and sizes. SANDING DISC A round sanding disc is located on the side of the belt/disc sander. SWITCH AND SWITCH KEY Your belt/disc sander has an easy access power switch. TRACKING KNOB A tracking knob aids in centering the sanding belt. WORK SUPPORT (BACKSTOP) Supports the workpiece on the sanding belt. WORK TABLE Equipped with a sturdy work table that provides a stable surface when using either the disc sanding or the belt sanding feature. 7 - English